yes a friend brought one back for me, and i have had it programmed and cut, and yes the keyless entry bit does not work the US Acura tsx runs on a different frequency to our euros.
you can start the car and unlock the door manually, just can unlock in remotely.
Hi Guys,
Just want to confirm about the above.... does this mean TL flip key cannot be used for euro even if we transfer the chip and all to the flip key?? I don't really care about the keyless entry/panic button, but as long it can be used for starting the car, remote lock/unlock and opening the trunk... I'll be pretty happy.
The quality of the TL key is so much better then the one currently sold in ebay.
Look at the photos above. The stock Euro button assembly will not fit into the TL's. The buttons are wider spaced than the TL's. SO those guys have to reprogram the TL key for the TSX, which has a different frequency to our Euro's.
Look at the photos above. The stock Euro button assembly will not fit into the TL's. The buttons are wider spaced than the TL's. SO those guys have to reprogram the TL key for the TSX, which has a different frequency to our Euro's.
Yeah may be you're right, it just that when I found this DIY (http://www.driveaccord.net/forums/showthread.php?t=9353) it gives me ideas since the guy who did it transferred the insides from normal key to the flip one (which is exactly the same with ours exept the panic button) and then program it him self.
as far as i can see from the picture you provided the buttons are in the wrong position so it isn't so much a direct swap and is more involved.
Well if it's about the button, again the TSX remote (not the flip key) pretty much has the same button with ours except for the panic button but the guy manage to convert it.
Anyway I do agree with curik that the frequency may not match with Ozy remotes to program it. My next service is coming up, so I'll ask the dealer here just to make sure.
man mines just sitting there.
the locksmith place i went to....has to get in a new machine.....cuase the metal bit on the key is some quality crap...and he wanted it to be precise..
cause it was for a my07 car...
he said it will be a couple more weeks.
ill let you know when i get it cut
unless anyone knows of a professional locksmiths around s.e melb
hey longers... i called up ramsec in dandy and he gave me the same spiel about getting in a better machine soon... so i ended up going to Moorabbin Locksmith on Chesterville Road... cost $44 and took about 15 mins... works perfect..!
lol give him a break, this is after all a forum and not just a giant search engine.. what are we gunna do when evry topic has been covered? disable posting and just have the search button there?
hey longers... i called up ramsec in dandy and he gave me the same spiel about getting in a better machine soon... so i ended up going to Moorabbin Locksmith on Chesterville Road... cost $44 and took about 15 mins... works perfect..!
ahhhhh you legend.
can you pm me the number? thanks champ
i called them on momday...still waiting on the blade...
does it work well?
To be honest..i dont think its work it. Purely because the flip key is such bad quality. Both halves are held together by three tiny screws so the edges dont seal properly because the spring pushes it apart
Originally Posted by ABS121
since the guy who did it transferred the insides from normal key to the flip one (which is exactly the same with ours exept the panic button) and then program it him self.
Bookmarks