Rear Sway Bar endlinks

**Crapdaz** · 14-05-2008 11:15 PM

lol i didnt hear mine crack.

**aeuro** · 14-05-2008 11:23 PM

Ooooh I did. I thought I had collected some wire beneath the car and was dragging it briefly. I was relieved to find the endlink snapped so that I had some explanation for the sound.

How long did you have to wait for you endlinks to arrive Crapdaz? Are you able to remember? I suppose it depends on what you paid for shipping though.

**Crapdaz** · 14-05-2008 11:27 PM

hmmm 1 week or so. they use EMS but unless otherwise you can ask for a cheaper method i think.

But the price you pay for it is pretty ideal for 2 links compared to HA $220 for both sides.

**aaronng** · 14-05-2008 11:28 PM

Were you using stock or aftermarket suspension with the whiteline?

**aeuro** · 14-05-2008 11:35 PM

Crapdaz thanks. I've also paid EMS so hopefully I'll have them by the end of next week. I'll just drive sedately until then.

$110 each for Honda endlinks! Are they mad?!

Aaron, apart from the RSB, the only changes I've made to the suspension are Koni dampers. All other parts are stock.

**aaronng** · 15-05-2008 10:07 AM

Originally Posted by aeuro

Crapdaz thanks. I've also paid EMS so hopefully I'll have them by the end of next week. I'll just drive sedately until then.

$110 each for Honda endlinks! Are they mad?!

Aaron, apart from the RSB, the only changes I've made to the suspension are Koni dampers. All other parts are stock.

Wow, you must have been doing some pretty hard cornering or track then... If you bought the dampers, why not some stiffer springs to help? Many reports in the US TSX forums also report the endlinks breaking when using a 22mm RSB with stock suspension. First time I'm hearing of endlinks breaking with the 18mm whiteline bar though.

**beeza** · 15-05-2008 10:20 AM

I was quoted $150 ish for endlinds from honda.'Hondar' (JDM Concept) on here sells em' for $69 delivered,takes 3 weeks.Go figure...

**Crapdaz** · 15-05-2008 12:55 PM

Wow, you must have been doing some pretty hard cornering or track then... If you bought the dampers, why not some stiffer springs to help? Many reports in the US TSX forums also report the endlinks breaking when using a 22mm RSB with stock suspension. First time I'm hearing of endlinks breaking with the 18mm whiteline bar though.

and first time you heard that the endlinks snapped from stock bar too.

I was quoted $150 ish for endlinds from honda.'Hondar' (JDM Concept) on here sells em' for $69 delivered,takes 3 weeks.Go figure...

not worth replacing with stock endlinks imho.