Obx Lsd

[Limbo]

Grumpy - cool, that's good to know. Any chance of a group buy with install?

[grumpy rooster]

any hint at the price you'd be selling them at?

lsd+install packages available? or even said shim kit, etc...

Slightly irelevant question... noticed your website... i was under the impression you worked at the same place with Joe at Minchinbury?

As listed in the OBX thread in my trader section they start at $600 and go up from there depending on what car they are for. As for a price for installed I'll find out and let you guys know.

And no, I don't work at Hi-Comp. Long time friend, customer, and help out with the race car at race meetings. And work together on some business projects like one that will be advised very shortly.

[shadou]

to take a gb apart you need a pair of needle nose pliers and a few sized socket pieces + extensions + compatible ratchets. Time consuming.

forgot the torque wrench if you're doing a proper job internal + external.

[dsp26]

forgot the torque wrench if you're doing a proper job internal + external.

funny he'd forget that too as he always uses it for any job he does lol.. even wheel nuts...

[bennjamin]

forgot the torque wrench if you're doing a proper job internal + external.

my "etc" in my post lol. With such precise and complicated parts a properly calibrated torque wrench is a must.

[Limbo]

lol i got one, its still in plastic and haven't used it yet

[ZeForce]

Im running a OBX LSD, install was straight forward with no fitment issues. So far it has preformed very well handling all my abuse.

[mqt55s]

taking it to a shop will cost about 500 including gearbox removal/install + cracking open the box and changing diff centres.
200 bux to fit the diff if you can remove the box yourself and take it to the shop.

[Limbo]

yeah got a quote, $400 to pull in/out box + $250 to install LSD.

Now just gotta get a hold of the LSD, shipping is $110USD from states.

[ZeForce]

http://search.stores.ebay.com/Sparkt...628693QQsofpZ0

[thepope1986]

pulling a diff apart isnt that simple. checking all bearing preloads shim adjustments and such is critical. tooth contact markings need to be checked also youd be best to replace g/b bearings especially cos you can screw some of them pulling them out you may need pulling tools and the like. if you have no idea about it id suggest the diff shop and then you can blame them if it lets go :P

[grumpy rooster]

As listed in the OBX thread in my trader section they start at $600 and go up from there depending on what car they are for. As for a price for installed I'll find out and let you guys know.

Finally got back to this thread with a fitted price. For the Sydney guys Adrian at Toda will fit them for $650 + whatever other parts are required. So supply and fit starts from $1250 and goes up from there depending on the LSD and parts etc.