Page 2 of 3 FirstFirst 123 LastLast
Results 13 to 24 of 33
  1. #13
    Member Array
    Join Date
    Dec 2004
    Location
    [ACT]
    Car:
    Integra
    im looking at getting a greddy turbo kit for my teg just because its convenient and comes with everything, just wanna upgrade injectors and maybe downpipe as it is restrictive.

    but will i need extra wiring or will it come with everythig in the kit? also you sugggest not to go higher than a 440 cc injector?

  2. #14
    Member Array
    Join Date
    Mar 2006
    Location
    Perth
    Car:
    CZ4A,EG-K,PP-K
    440 cc is good for 400 hp! so its okay to use not more than 440 cc aniway. stock engine + turbo wont make it dat high figure with safe tune.

    emanage blue doesnt have bigger injector increase % from stock. dats why is not recomended more than 440cc
    Unicorn: K20R Honda Beat PP1
    BTMotorsports
    JDM Auto Link - Your source for new and pre-owned JDM parts

  3. #15
    Member Array
    Join Date
    Dec 2004
    Location
    [ACT]
    Car:
    Integra
    ok cool so 440cc sounds good then.

    also does the emange in the kit come with the ingition harness to tune ingnition or do i need to buy that seperatley??

  4. #16
    Member Array
    Join Date
    Jul 2005
    Location
    Tai Land
    Car:
    Subaru Tai-berty
    it comes with the injector harness not the ignition harness, well mine didnt anyways, n didnt kno till i went for a tune.
    the kit comes with everythin pretty much, i would highly recommend gettin the kit with the cooler and piping too unless u wanna get custom done. but ebay piping is a big no no, cooler from ebay is okay tho.
    I still got piping from my "kit" off ebay lyin in my trunk.

    I had sum issues with injectors cause mine werent made for honda but for ford but after some customisation they fit fine. They are Huge injectors and atm they are running at i think 60% capacity on 6-7psi.

    Wen u get your kit get the installer to check it out before u actually install it. n get all d parts. Id recommend gettin your gauages too, temp(oil/water/exhaust),boost, air/fuel ratio. etc Also get a fuel pump.

    dats all that i can think off from d top of my head.

  5. #17
    Member Array
    Join Date
    Sep 2005
    Location
    Hi Power Racing
    Car:
    EF8 - Fastest F
    i use emanage on my CRX ... AWESOME piggyback..

  6. #18
    Member Array
    Join Date
    Nov 2004
    Location
    Manly Yo
    Car:
    ED/EG5/EP3/JAZZ
    Quote Originally Posted by dudeling7 View Post
    ok cool so 440cc sounds good then.

    also does the emange in the kit come with the ingition harness to tune ingnition or do i need to buy that seperatley??
    Some of the kits come with more options than others.. and are priced accordingly
    161.4KW ATW Tuned By TODA
    EG5 JDM B16A SiR-II TURBO

    13.28@106.6mph 2.117 60ft On RE001

  7. #19
    Member Array
    Join Date
    Dec 2004
    Location
    [ACT]
    Car:
    Integra
    alright cool will have to sus it out then thank a lot guys! ive bought an intercooler already, think the kit comes with some piping so can what a cooler on if not maybe jsut customise some pipes

  8. #20
    Member Array
    Join Date
    Sep 2006
    Location
    Out in Nature
    Car:
    91 eg5 b16a
    Great to hear the emanage is loved.It is kinda looked down on,I guess cause of Hondata etc...

  9. #21
    Member Array
    Join Date
    Nov 2004
    Location
    Manly Yo
    Car:
    ED/EG5/EP3/JAZZ
    Quote Originally Posted by Fo55il View Post
    it comes with the injector harness not the ignition harness, well mine didnt anyways, n didnt kno till i went for a tune.
    the kit comes with everythin pretty much, i would highly recommend gettin the kit with the cooler and piping too unless u wanna get custom done. but ebay piping is a big no no, cooler from ebay is okay tho.
    I still got piping from my "kit" off ebay lyin in my trunk.

    Fuel Pump

    I got my FMIC pipping from eBay USA

    Worked perfect

    Few mods with the dermal was all that was needed and at only $190 bargain

    As for the fuel pump is not needed on D's with this kits power output.. but its not a bad option but if you've happen to install a new stock one recently then don't bother..

    Stock pumps rated at 200hp and I'm only making 172WHP

    Quote Originally Posted by dudeling7 View Post
    alright cool will have to sus it out then thank a lot guys! ive bought an intercooler already, think the kit comes with some piping so can what a cooler on if not maybe jsut customise some pipes
    They do come with piping but its not enough.

    Its make to complete the loop without a FMIC and get you up and running
    Last edited by Lukezen27; 26-05-2008 at 07:40 PM.
    161.4KW ATW Tuned By TODA
    EG5 JDM B16A SiR-II TURBO

    13.28@106.6mph 2.117 60ft On RE001

  10. #22
    I'm glad this forum is helping others, ive actually begun re-writting the emanage software to add more features such as knock sensor integration, auto-tune improvement etc... ill let u guys know how i go

  11. #23
    Member Array
    Join Date
    Nov 2004
    Location
    Manly Yo
    Car:
    ED/EG5/EP3/JAZZ
    Quote Originally Posted by MikeLary View Post
    I'm glad this forum is helping others, ive actually begun re-writting the emanage software to add more features such as knock sensor integration, auto-tune improvement etc... ill let u guys know how i go
    What motor are you running again Mike?

    I'd love to add a knock sensor for safety
    161.4KW ATW Tuned By TODA
    EG5 JDM B16A SiR-II TURBO

    13.28@106.6mph 2.117 60ft On RE001

  12. #24

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.