Page 2 of 2 FirstFirst 12
Results 13 to 22 of 22
  1. #13
    Member Array
    Join Date
    Aug 2004
    Location
    Sydney Harbour Bridge
    Car:
    03 CL9 Euro
    hey guys,

    another question, with the stock headunit what connectors are used to be plugged into it from the speakers?
    Are they RCA connectors?

    Thanks all.
    vTeK 4-Life!
    FOR SALE: CL9

  2. #14
    no... RCA dont carryamplified signals.

  3. #15
    Member Array
    Join Date
    Aug 2004
    Location
    Sydney Harbour Bridge
    Car:
    03 CL9 Euro
    Quote Originally Posted by tron07 View Post
    no... RCA dont carryamplified signals.
    just wondering what connectors are plugged into the stock HU from speakers?
    vTeK 4-Life!
    FOR SALE: CL9

  4. #16
    sorry... not into stock.... its either stock and you dont touch it or go all out....

  5. #17
    Member Array
    Join Date
    Aug 2004
    Location
    Sydney Harbour Bridge
    Car:
    03 CL9 Euro
    Quote Originally Posted by tron07 View Post
    sorry... not into stock.... its either stock and you dont touch it or go all out....
    cause i was going to use stock speakers until i replace mine with new ones.
    vTeK 4-Life!
    FOR SALE: CL9

  6. #18
    I would probably use the ghetto method... cut and rewire, then use a heat shrink shealth to seal it.

  7. #19
    Member Array
    Join Date
    Aug 2004
    Location
    Sydney Harbour Bridge
    Car:
    03 CL9 Euro
    Quote Originally Posted by tron07 View Post
    I would probably use the ghetto method... cut and rewire, then use a heat shrink shealth to seal it.
    yups prob will do that, thats what i did with my ghetto EDFC install to the accessory + illumination wires.

    Also is there a way to easily access the harness of the stock unit? taking the top trim off or the console CD pocket?
    vTeK 4-Life!
    FOR SALE: CL9

  8. #20
    Quote Originally Posted by D R U View Post
    I cant remember the mounting depth of the stock speakers, but i think you only have about 60 - 65 mm using the stock position, which is too small for most speakers.
    Yeah, it's actually about ~50mm from the window and ~80mm from the bar.

    Crapdaz, check out these two threads for what I did.

    http://ozhonda.com/forum/showpost.ph...40&postcount=8
    http://ozhonda.com/forum/showpost.ph...7&postcount=49

    HTH

    -Steve

  9. #21
    Member Array
    Join Date
    Feb 2007
    Location
    Wollongong NSW
    Car:
    2004 Honda Accord Euro
    I went a full rockford fosgate setup in mine

    Fronts - http://www.rockfordfosgate.com/produ...n_US&p_status=
    Rears - http://www.rockfordfosgate.com/produ...n_US&p_status=

    I just carved out the actual door interior and mounted on that for the fronts and same as the rear.

    got 2 alpine line out converters behind the standard deck
    and ran the RCAs to the rear and got 2 amps

    Subs - http://www.rockfordfosgate.com/produ...n_US&p_status=

    Speakers - http://www.rockfordfosgate.com/produ...n_US&p_status=
    and 2 12' RF subs in the RF box

    http://www.rockfordfosgate.com/produ...n_US&p_status=

    and yeh a few people have seen mine and said it looks alright =D
    if you want i can get some piccies
    BraXtas Ride

    List of parts added
    - Exhaust system - Custom CAI setup - K&N Air Filter - Rockford Fosgate Speaker setup with punch 2 Subs - J's Racing Front Strut bar

  10. #22
    RF... used to like them, then I got poison by more exotic stuffs...
    RF dont make amps like they used to... I heard maybe there are going back towards the old school era again.

    this is my first setup.....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.