Page 17 of 26 FirstFirst ... 714151617181920 ... LastLast
Results 193 to 204 of 301
  1. #193
    Member Array
    Join Date
    Nov 2004
    Location
    Manly Yo
    Car:
    ED/EG5/EP3/JAZZ
    Need to change back to my stock Fly wheel as well...

    Now that I'm boosted the lightweight one is losing me momentum
    161.4KW ATW Tuned By TODA
    EG5 JDM B16A SiR-II TURBO

    13.28@106.6mph 2.117 60ft On RE001

  2. #194
    Member Array
    Join Date
    Jun 2005
    Location
    Brisbane Queensland
    Car:
    1985 ford laser
    Id say not worry about it man. Its giveing you gains at low rpm.. but you just loose out if your "granny shiftin". Practice driving more with your setup as is and getting your shifts as fast as possible. You will loose RPM faster with a light flywheel vs a stock one on shifts.

    if you got the guts to be a bit mean on your box give flat shiftin a go!
    Light up with Lyle - Electrical / Communications / Instrumentation

  3. #195
    Member Array
    Join Date
    Nov 2004
    Location
    Manly Yo
    Car:
    ED/EG5/EP3/JAZZ
    Quote Originally Posted by Sexc86 View Post
    Id say not worry about it man. Its giveing you gains at low rpm.. but you just loose out if your "granny shiftin". Practice driving more with your setup as is and getting your shifts as fast as possible. You will loose RPM faster with a light flywheel vs a stock one on shifts.

    if you got the guts to be a bit mean on your box give flat shiftin a go!
    Yeah maybe but the boys on d-series.org change em back quiet often after boosting the D's

    Quote Originally Posted by Weq View Post
    Luke, have u looked up FI 1/4 FWD videos on the internet yet? My guess is that this is whats happening.

    http://www.civictsi.com/Videos/Civic...sideCarRun.mpg

    1st - wheelspin wheelspin shift
    2nd - wheelspin wheelspin shift
    3rd - bog bog bog bog boost traction on your way
    4th traction end 1/4

    U gotta modulate throttle, peddle the wheelspin and hookup 3rd in your powerband. Thats the key. Ds produce as much torque as horsepower. Bs are lucky to make half. Peak torque is around 4000-5000rpm. Launching at anything in the range will have the same effect. You got to peddle the wheelspin. It takes alot of practice.

    Now go watch a NA FWD 1/4 mile video at the same ET region. Its alot less involved.

    Go read:
    http://hondaswap.com/general-tech-ar...art-2-a-29058/

    Your chinese spec tempe tyre combo is likely adding over 200kgs the the weight of your car. Along with taking longer to get into your powerband, causeing more lag, and less traction due to less sidewall.

    Go read turboD16 in regards to 1/4mile pointers.

    Oh and lastly, your boost falling off is probably the reason your hitting the MPH you are. At 10psi u should be trapping 100mph. 100mph is the key to 13's. That said, it was ur first time out, i would be happy with improving. Ive seen civics run 14.2@117mph.
    That's exactly what's happening in that MPG just not at those high RPM's
    Last edited by Lukezen27; 29-06-2008 at 05:02 PM.
    161.4KW ATW Tuned By TODA
    EG5 JDM B16A SiR-II TURBO

    13.28@106.6mph 2.117 60ft On RE001

  4. #196
    Member Array
    Join Date
    Nov 2004
    Location
    Manly Yo
    Car:
    ED/EG5/EP3/JAZZ
    Ok Guys

    Setup Changed thus far

    Completed:
    New Plugs and re-gapped
    New Fuel Pump
    MBC Installed
    Stock Wing Ready for D day install

    Yet to do:
    Adjust my Coilovers to raise the back up a bit to force the weight to the front wheels.
    New Tyres ( Won’t be done till after I get back from Thailand)
    161.4KW ATW Tuned By TODA
    EG5 JDM B16A SiR-II TURBO

    13.28@106.6mph 2.117 60ft On RE001

  5. #197
    Member Array
    Join Date
    Nov 2006
    Location
    Jimboomba, QLD
    Car:
    The Moving Kind
    with the coil overs get ones with adjustable hardness. u wont have to raise the back up, just make it harder in the rear

  6. #198
    Member Array
    Join Date
    Nov 2006
    Location
    Jimboomba, QLD
    Car:
    The Moving Kind
    when i adjusted my coil overs in 16 adjustable (16 being hardest) i set fronts at 9 and rears at 13. might be wrong but seemed to work well (mind u i never took it to the strip with the adjustable coil overs)

    ps ur all a bunch of whingers....

    however with my crap as luanch's in my turbo d, my first time i was hitting the same times and hitting 95-96mph.....

    that was on 5 psi with 22kw's less??? i never timed it on 10 but it was def alot quicker round town....

    hmmm take it out again after u done ur small amount of work, have some more practise and see if u can pull that sucker into the 13 second braket which it should be capable of with that power...
    Last edited by Aza; 11-07-2008 at 09:37 AM.

  7. #199
    Member Array
    Join Date
    Nov 2006
    Location
    Jimboomba, QLD
    Car:
    The Moving Kind
    Quote Originally Posted by 90LAN View Post
    lyle u havent driven a b series na car on the track especially willowbank yet have u? i think u are wrong in this point
    stickiest track in oz
    hard to explain to some one who hasnt
    i have own turbo cars b4 so i know the diffence between the two
    btw sorry to bring this back up... his missus had a H22 prelude which he has taken down willowbank a few times. sorry its not an all mighty b series... ur probable right he still wouldnt no the diffence

  8. #200
    Member Array
    Join Date
    Nov 2004
    Location
    Manly Yo
    Car:
    ED/EG5/EP3/JAZZ
    Quote Originally Posted by Aza View Post
    with the coil overs get ones with adjustable hardness. u wont have to raise the back up, just make it harder in the rear
    Thats how I had them set bro

    The Ling Longs are the real problem I think
    161.4KW ATW Tuned By TODA
    EG5 JDM B16A SiR-II TURBO

    13.28@106.6mph 2.117 60ft On RE001

  9. #201
    Member Array
    Join Date
    Nov 2006
    Location
    Jimboomba, QLD
    Car:
    The Moving Kind
    well mine were same coil overs on urs with the ride hight set on the lowest setting hehehe

  10. #202
    Member Array
    Join Date
    Nov 2004
    Location
    Manly Yo
    Car:
    ED/EG5/EP3/JAZZ
    Quote Originally Posted by Aza View Post
    well mine were same coil overs on urs with the ride hight set on the lowest setting hehehe
    Yeah bad tyres and I suck all adds up
    161.4KW ATW Tuned By TODA
    EG5 JDM B16A SiR-II TURBO

    13.28@106.6mph 2.117 60ft On RE001

  11. #203
    Ozhonda Trader Array
    Join Date
    Aug 2003
    Location
    Sydney.
    Car:
    EGK24A
    Quote Originally Posted by Aza View Post
    with the coil overs get ones with adjustable hardness. u wont have to raise the back up, just make it harder in the rear
    I disagree with that

    you gotta raise the rear end up and try to run stiffer rear springs and adj the damper to the hardest.
    JDMyard Pty Ltd
    25 / 317-321 Woodpark Rd , Smithfield , NSW 2164. Contact : 02 97572364
    Email : yonas@jdmyard.com , Facebook : http://www.facebook.com/JDMYard
    www.JDMyard.com

  12. #204
    Member Array
    Join Date
    Nov 2004
    Location
    Manly Yo
    Car:
    ED/EG5/EP3/JAZZ
    Quote Originally Posted by EG5 View Post
    I disagree with that

    you gotta raise the rear end up and try to run stiffer rear springs and adj the damper to the hardest.
    That's my plan
    161.4KW ATW Tuned By TODA
    EG5 JDM B16A SiR-II TURBO

    13.28@106.6mph 2.117 60ft On RE001

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.