Quote Originally Posted by 05dc5S View Post
that offset with -2 camber should be fine for inner clearance...

however on 19's slammed 3 inches im pretty sure it will rub...

what tyres are you getting? the wider the the tyre and higher the profile the higher your chances of rubbing
Quote Originally Posted by K20A DC5 View Post
Lookin at 19x8.5 for a DC5
the offsets the rim comes in is +35.

Will use coilovers for a big height drop, at least 3 inches...and a rear camber kit to square it up.

How will this offset go?

I want maximum guard fill, and only want a max of 1.5-2 deg camber in the rear to help clearnace..thats a maximum

The wheels are koya inox magic..

ps looksy here

http://www.1010tires.com/WheelOffsetCalculator.asp

Is this gonna work or will the offset need to be lower?
Ill be using coilovers too, so i should have more room on the inside as the shock clearance should be better.

I agree with 05dc5S you should be fine for inner clearance front and rear. Might rub a little on the inner guard/chassis at full lock if you are dumped.

As for alignment if you roll your guards at the rear you should be able to get away with not much more than -1 camber. Front I would go for 2 degrees negative. If you are super afraid of camber you could go for a 225 tyre which will make it much easier to fit. The wheels sound like they will fit well just buy them and then make the necessary adjustments (camber, guards) to make them fit .