[CL9] Ram Vortex Ducted intake System

**Suntzu** · 06-07-2008 11:41 PM

Put a 200 watt hair-dryer fan in it and run it off the alternator. It wont do shit but it will look cool next to your sub-space vortex generator.

Might make a nice sound too when all this rice gets sucked into the intake manifold. For about 50 milliseconds.

**Crapdaz** · 07-07-2008 08:02 AM

Originally Posted by Suntzu

Put a 200 watt hair-dryer fan in it and run it off the alternator. It wont do shit but it will look cool next to your sub-space vortex generator.

Might make a nice sound too when all this rice gets sucked into the intake manifold. For about 50 milliseconds.

like those intake propeller toys you can get on ebay.

**beeza** · 07-07-2008 03:17 PM

I just installed the same intake in my car a week ago:
http://www.ozhonda.com/forum/showthread.php?t=93744

I really like mine,it goes real good!
I didn't bother with the spinning part...I think it would restrict air flow.

Can U get replacment filters for it do U know?

**Type R Positive** · 07-07-2008 03:17 PM

Originally Posted by Suntzu

Put a 200 watt hair-dryer fan in it and run it off the alternator. It wont do shit but it will look cool next to your sub-space vortex generator.

Might make a nice sound too when all this rice gets sucked into the intake manifold. For about 50 milliseconds.

I see funny shit like this on ebay, and on other forums.

Im on a Yanky dirtbike forum, and there was one bloke trying to flog off computer fan set up for dirtbike for big $$$.

Funny as fcuk if you have the time to read:
http://www.thumpertalk.com/forum/sho...&highlight=fan

**JunYu** · 07-07-2008 03:42 PM

that's different!

wonder if the filter gets enough air on idle/take off! it's in such a confined space!

**aaronng** · 07-07-2008 03:51 PM

Originally Posted by JunYu

that's different!

wonder if the filter gets enough air on idle/take off! it's in such a confined space!

Dyno before and after to find out. Too bad he has already installed it.

**beeza** · 07-07-2008 03:55 PM

Originally Posted by JunYu

that's different!

wonder if the filter gets enough air on idle/take off! it's in such a confined space!

I wondered this for so long.Finially took a punt and it works great!

**Type R Positive** · 07-07-2008 04:06 PM

LSD GD3, pull that vortex shit out of the intake man, it's blocking valuble air space.

With that set up, I'd go SRI, with the pipework disconnected, but aiming at the filter. I believe that pipework would create too much restriction.I'd go at least 3" on the intake. That looks 2.5" or less. I think I'll stick to K&N CAI, but it is good to see some DIY happening.