Quote Originally Posted by souperman View Post
when installing the asr brace, how long does the lca bolt need to be?

i've got everything ready and about to install but looking at the lca bolt that i have in front of me (it's only 12cm long). the bolt needs to go through the asr brace, the lca, and pop out the otherside. is 12cm enough?

is the oem bolt long enough?

btw, it's for a stock em1
The ASR ones for my ek are 12cm long, you got the correct bolts.

Quote Originally Posted by bennjamin View Post
the softer and higher your car sits , the more wear and tear you will put on your swaybar
Actually, for the purpose of good info, the lower the car sits the more stress placed on the swaybar. This is because lowering the car lowers the roll centre (point around which the cars body rolls during cornering) quite significantly, moving it further below the cars centre of gravity.

The larger distance between the roll centre, and the cars centre of gravity acts as a longer lever, and causes more roll. So basically lowering your car, is gunna produce more bodyroll.