Gauge install

[RSX_DC5R]

Hi All,

I am going to install oil press and temp gauges onto my DC5R.

I am wondering if anyone has tried to bring the sensor wires through the firewall other than from the place where the ECU wire is going through? I am just trying to find alternative ways (if possible) to get the wires through.

Pic will be great if available

Tried search in the forum but could not found any post that really answer my question. This is specifically for DC5R.

Thanks in advance

[mikul_ha]

http://forums.clubrsx.com/showthread.php?t=455630

[RSX_DC5R]

Thanks dude...

seen that one but does not really the same as DC5R

[mikul_ha]

i used this guide to do mine...

ctrl unit -> under the dash -> thru the rubber near door hinge -> behind the fender -> into the engine bay

[RSX_DC5R]

i used this guide to do mine...

ctrl unit -> under the dash -> thru the rubber near door hinge -> behind the fender -> into the engine bay

Thanks mikul_ha

I have finally installed them...hehe