Luke, have u looked up FI 1/4 FWD videos on the internet yet? My guess is that this is whats happening.
http://www.civictsi.com/Videos/Civic...sideCarRun.mpg
1st - wheelspin wheelspin shift
2nd - wheelspin wheelspin shift
3rd - bog bog bog bog boost traction on your way
4th traction end 1/4
U gotta modulate throttle, peddle the wheelspin and hookup 3rd in your powerband. Thats the key. Ds produce as much torque as horsepower. Bs are lucky to make half. Peak torque is around 4000-5000rpm. Launching at anything in the range will have the same effect. You got to peddle the wheelspin. It takes alot of practice.
Now go watch a NA FWD 1/4 mile video at the same ET region. Its alot less involved.
Go read:
http://hondaswap.com/general-tech-ar...art-2-a-29058/
Your chinese spec tempe tyre combo is likely adding over 200kgs the the weight of your car. Along with taking longer to get into your powerband, causeing more lag, and less traction due to less sidewall.
Go read turboD16 in regards to 1/4mile pointers.
Oh and lastly, your boost falling off is probably the reason your hitting the MPH you are. At 10psi u should be trapping 100mph. 100mph is the key to 13's. That said, it was ur first time out, i would be happy with improving. Ive seen civics run 14.2@117mph.
Bookmarks