Page 4 of 4 FirstFirst 1234
Results 37 to 44 of 44
  1. #37
    Newcomer Array
    Join Date
    Jan 2008
    Car:
    07 Honda Accord Euro
    it already has a set of H&R coilovers in it. I'm just taking it back to the suspension place to get rid of a knocking noise. The H&R coils are reall nice, maybe a bit soft and thats why it travels to much leading to it scraping the plastic gaurd.

    At the moment the car isn't riding super low. There is prob 2cm or more between the tyre and wheel arch.

    But i will deffinately look into adjusting the camber, it might just be enough to stop that occasional scuffing

    will keep you posted

  2. #38
    Member Array
    Join Date
    Aug 2004
    Location
    Sydney Harbour Bridge
    Car:
    03 CL9 Euro
    Quote Originally Posted by TOH07 View Post
    it already has a set of H&R coilovers in it. I'm just taking it back to the suspension place to get rid of a knocking noise. The H&R coils are reall nice, maybe a bit soft and thats why it travels to much leading to it scraping the plastic gaurd.

    At the moment the car isn't riding super low. There is prob 2cm or more between the tyre and wheel arch.

    But i will deffinately look into adjusting the camber, it might just be enough to stop that occasional scuffing

    will keep you posted
    yeh think your problem is the H&R cause it's too soft.
    hope they can fix the problem without you having to lower your profile or too much camber.
    vTeK 4-Life!
    FOR SALE: CL9

  3. #39
    I run tein super comforts with my 20's and i can;t feel the difference from original. May even feel better cause of no body roll around corners

  4. #40
    Member Array
    Join Date
    Aug 2004
    Location
    Sydney Harbour Bridge
    Car:
    03 CL9 Euro
    Quote Originally Posted by bar70 View Post
    I run tein super comforts with my 20's and i can;t feel the difference from original. May even feel better cause of no body roll around corners
    do you scrub?
    how many finger gaps you got?
    wished my car was as comfy as stock again.
    vTeK 4-Life!
    FOR SALE: CL9

  5. #41
    Newcomer Array
    Join Date
    Apr 2008
    Location
    Sydney
    Car:
    '08 CL9 Euro 6MT Luxury
    what is the legal limit from the ground?

    i heard it's around 3 inchs... just enough for a can to be rolled underneath

  6. #42
    Newcomer Array
    Join Date
    Jan 2008
    Car:
    07 Honda Accord Euro
    Last time i checked the legal limit in QLD is 100mm

  7. #43
    Member Array
    Join Date
    Aug 2004
    Location
    Sydney Harbour Bridge
    Car:
    03 CL9 Euro
    Quote Originally Posted by xsite85 View Post
    what is the legal limit from the ground?

    i heard it's around 3 inchs... just enough for a can to be rolled underneath
    may differ from state to state but should be 100mm from the lowest part of your car.
    vTeK 4-Life!
    FOR SALE: CL9

  8. #44
    only scrubs on front going around tight corners;
    Havn't rolled any guards but
    Got coilovers nearly all the way down

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.