Page 1 of 2 12 LastLast
Results 1 to 12 of 18
  1. #1
    Newcomer Array
    Join Date
    Mar 2008
    Location
    Sydney
    Car:
    2001 DC2R

    DC2R Exhaust/Computer

    Hey Guys, ive got a DC2R and im wanting to put in Full exhaust system + computer + tune. my price range is about 3k for the lot, any suggestions about exhaust/headers/cat + computer to fit the price range, bear in mind the tune and install.

    Cheers

  2. #2
    Member Array
    Join Date
    May 2005
    Location
    Villawoood
    Car:
    n/a
    I would go tri y header, custom 2.5in exhaust and Power FC with tune. Should be pretty good and rip any production turbo cars on the planet...

  3. #3
    Member Array
    Join Date
    Mar 2006
    Location
    Sydney
    Car:
    doorstop
    leave the brand name exhaust parts off the list & u might just scrape it for $3k.

    have a look at the new neptune ECU,they are claiming 35% gains for this setup,lol,must be the miracle product all us NA guys have been waiting for...........

  4. #4
    Newcomer Array
    Join Date
    Mar 2008
    Location
    Sydney
    Car:
    2001 DC2R
    Indy recommended fujitsibo all the way through to HKS tip with apexi power fc? any thoughts on that?

  5. #5
    Newcomer Array
    Join Date
    Mar 2008
    Location
    Sydney
    Car:
    2001 DC2R
    but ill check out that neptune one aswell thanks. Does it have a specific name?

  6. #6
    Member Array
    Join Date
    Mar 2006
    Location
    Hillz District
    Car:
    MY08 WRX G3
    u could go full xforce system
    then hondata s200+tune from toda.
    mite be just over or under 3k.
    with 3k i dunt think its gonna get u much blingage brands.lol
    correct me if wrong

  7. #7
    Member Array
    Join Date
    Mar 2008
    Location
    Sydney
    Car:
    Bangbus
    Tri-Y headers = $500
    High flow cat = $150
    Nice muffler = $200
    Custom b-pipe = $300
    Hondata S200 = $900
    Tune = $500

    Total: $2550


  8. #8
    Member Array
    Join Date
    Mar 2006
    Location
    Sydney
    Car:
    doorstop
    might find it hard to get an s200 these days as they were discontinued earlier this year.

  9. #9
    Member Array
    Join Date
    May 2008
    Location
    Sydney, North
    Car:
    A piece of shit
    I'd put the money towards full exhaust and intake. Mugen intake + What ever cat back + good header. The stock ECU can compensate for these mods.

  10. #10
    Member Array
    Join Date
    Mar 2008
    Location
    Melbourne Clayton
    Car:
    Evo7
    Mugen intake + toda headers + JDM cat + any catback + either a Power FC (if ur planning on further mods such as cams and stuff) or an e-manage (if u dont plan on doing anything else for as long as u have the car)

  11. #11
    Member Array
    Join Date
    Mar 2006
    Location
    Sydney
    Car:
    doorstop
    Quote Originally Posted by vincikwan View Post
    Mugen intake + toda headers + JDM cat + any catback + either a Power FC (if ur planning on further mods such as cams and stuff) or an e-manage (if u dont plan on doing anything else for as long as u have the car)
    blowing the budget out a little there perhaps?

  12. #12
    Quote Originally Posted by AjMikkO View Post
    but ill check out that neptune one aswell thanks. Does it have a specific name?
    i'm running a neptune atm. accompanied by CAI, 4-2-1 5zigen header, hi flo cat (generic as it's just a cat) and a mugen twinloop

    look me a while to finally decide on this set up but it runs very well and has given me the joy of driving my car now.

    duno what setup ur looking for but there's just an example and i'm very happy with mine (compared to what it was stock )

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.