2009 Euro Switchblade key mod

[kimnkk]

I just got the CU2 TSX key off Printon (thanks heaps mate ) and can confirm that it works with the CU2 (at least so far). Got the Memory 2 seat one but it doesn't seem to move the seat to position 2 when i unlock it with this key.

I've just programmed the transmitted so far, still have to get it cut and find a place to program the immobiliser.

They key feels great though, solid (unlike the 3rd party eBay one i got for my CL9) and has a decent weight to it. Acura badging looks great too, only if its different, but i wouldn't mind changing the Honda badges to Acura .

Does anyone know of a good place in East or SE Melb that can cut and/or program an immobiliser for the CU2?

[longers]

did i mention rams locksmith to you?

[kimnkk]

did i mention rams locksmith to you?

Nah but thanks mate, i'll check them out. Can they program the immobiliser as well? Thanks for the rec mate

[longers]

not sure about the immobiliser bit. but won't hurt to call up and ask.
i've heard they do really good jobs when it comes to cutting keys

Ram Security Locksmith
Telphone: 1300 137 726
Facsimile: +61 (03) 9793 3584
Address: 122 Foster Street,
Dandenong
Victoria 3175.
Australia.

[printon]

enjoy your key, kimnkk, I will try to make my TL key working on MY CL9, Good on me

[kimnkk]

I thought the panic button feature didn't work but it turns out that you have to hold it on for a few seconds . Here's a comparison of the flip and stock key. Sorry about the heatshrink on the stock key, the other key is attached to a billion others at the moment.

not sure about the immobiliser bit. but won't hurt to call up and ask.
i've heard they do really good jobs when it comes to cutting keys

Thanks mate, i'll give them a call tomorrow morning

enjoy your key, kimnkk, I will try to make my TL key working on MY CL9, Good on me

Cheers . I would love to know if you get the CL9 one working too - probably the first CL9 Honda flip in Australia?

[longers]

i shot gun second LOL

edit: i dont drive an CL9...first for CM5

[xsite85]

sorry i have the switchblade key for my CL9

haven't had a chance to cut it yet... because of all the replies stating that it won't work

printon, when you program the new receiver, let us know the feedback.. i would also like to get that installed on mine...

cheers

[printon]

Hi!all, I can't wait, but today is Sunday, i will let you guys know after i done this whatever success or disappoint again

[johnnyofhk]

Hi!all, I can't wait, but today is Sunday, i will let you guys know after i done this whatever success or disappoint again

by changing the receiver, it should be fine, coz the key is working fine but remote function
Goodluck!

[xsite85]

by changing the receiver, it should be fine, coz the key is working fine but remote function
Goodluck!

thats why.. his changing the receiver to the switchblade key frequency..

i hope this actually worked.. so then we don't have to change our complete alarm system

[huhjared]

Did anyone try these????

http://cgi.ebay.com.au/Honda-3-Butto...QQcmdZViewItem

Am i missing something out here?? wont this be a cheaper option? i am about to get this done.... its $80 all up for the conversion... but still considering as i had one of these keys and they tend to never flip back in after like a year or so...