2009 Euro Switchblade key mod

[longers]

its crappy quality. very crappy quality. the panels don't sit flush, and all the chrome fades.

[xsite85]

that key looks very dodgy..

[kimnkk]

Well, what can i say? It worked .

Got it cut for $35 from a place Eastern Honda uses and recommends, and the programming was $55.

Works perfect

Let us know how you go with yours Printon! Good luck with it, harder task for the CL9 .

[printon]

Hi! all, kimnkk goes very well, but i got bad news, It didn't working on my EuroCL9, the master switch of us'accord(2005) arrived at last friday, FCC ID: OUCG8D-380H-B IC: 850G-G8D380HB, It should be same thing with this link
http://www.driveaccord.net/forums/showthread.php?t=9353
I removed my original switch,and replace with US one, perfectly fits, all no problem except programming the remotes, again, same issue. but I don't no why?
I will post some pictures later.

[adrianf]

i'm keen to buy one. anyway else want to join to save on shipping? it's only an additional $2US per extra key.
http://cgi.ebay.com/ebaymotors/2009-...1008QQtcZphoto

[kimnkk]

I removed my original switch,and replace with US one, perfectly fits, all no problem except programming the remotes, again, same issue. but I don't no why?
I will post some pictures later.

Ahh, that's a bummer . Weird, if you're using the immobiliser from your current chip i don't see why that wouldn't be able to start the car. You wouldn't need to program anything apart from the unlocking/locking module, correct? If that is the same frequency it might work.

Keep us updated mate

[printon]

some pictures,hope it's helpful

[printon]

[printon]

the frequency receiver ( FCC ID: OUCG8D-380H-B IC: 850G-G8D380HB)
TL key ( FCC: OUCG8D-439H-A IC: 850G-G8D439HA)
Check this link http://www.driveaccord.net/forums/showthread.php?t=9353
I think should be same, but Why didn't working on our CL9

[kimnkk]

Wow, that's weird! I'm guessing they both use the same frequency as well, as their FCC ID and IC are the same. Then it would seem that there's no difference between the US Accord and our CL9, similar as to how the CU2 Euro is the same as the CU2 TSX.

When you inserted your current immobiliser chip into the US Accord key, what else did you have to program? Only the lock/unlock module, yeah?

[xsite85]

FCC ID: OUCG8D-380H-B <-- i think the 380 part is the frequency (correct me if i'm wrong)

we have to change the receiver to 439 for it to work

is that what you purchased Printon?

[printon]

Yes, i bought 07 TL Key form ebay, FCC: OUCG8D-439H-A IC: 850G-G8D439HA, I know the Fcc not match the the frequency receiver (FCC ID: OUCG8D-380H-B IC: 850G-G8D380HB), but i found some American guys they did a TL key conversion with their Honda accord (03-07)Key,
the Fcc of their original honda key is OUCG8D-380H-A, so that's why I am thinking if i replace our euro frequency receiver with US accord one which is the Fcc is OUCG8D-380H-B, after that, TL key should be working as well, May be i was wrony