top speed header

[aaronng]

so what can i do ?? new filter? or new SRI?

Try changing the filter first. K&N is a good starting choice because it comes in many diameters. I just don't like the oil, hence the reason for me using Apexi.

[johnprocter]

Try changing the filter first. K&N is a good starting choice because it comes in many diameters. I just don't like the oil, hence the reason for me using Apexi.

so with the SRI you have and the filter you have you dont experience that short range lag?

[aaronng]

so with the SRI you have and the filter you have you dont experience that short range lag?

I have an enclosure around the pod, which helps since it gets cool air.
What do you mean by lag? You don't mean loss of torque in low rpm? if it is lag, then it coul dbe the DBW.

[johnprocter]

LOL sorry i feel like the biggest noob in sydney whats a DBW?

[Crapdaz]

As i said before i do not have that lag with my SRI as it does not have the dual inlet.

Where it is located in the base of the filter i have a plastic cap (brand name).

But as aaron has mentioned it is best to have it enclosed or semi enclosed as you do not have the hot temp from the K series engine sucked in and draining it's potential power output.

If you have a CAI piping feeding the SRI it's a good choice plus implementing a casing to it is even better.

DBW - Drive by wire

[johnprocter]

so dual inlet is reffering to the actual pod right? so if i replace that, i SHOULD be solving the problem.. and whatever that DBW is, yes when i talk about lag i mean lack of torque

[johnprocter]

might have to do aarongs ghetto box after HSC aswell LOL to stop the hot air

[johnprocter]

this would be considered a dual inlet right?

and this a single?

[aaronng]

this would be considered a dual inlet right? [img]http://www.autobarn.com.au/AB_images/products/images/prod_1192581433.jpg[img]

and this a single? [IMG]http://www.nzperformance.co.nz/store/images/uploads/New%20images/RU-2520.jpg[IMG]

That's right. It might or might not solve the problem, depending if the cause is from the pod or from the DBW. So you have a 50/50 chance.

[Crapdaz]

yup as aaron has said.

It's hard to know where the problem is and also cause we don't really know how your car drives compared to ours.

[EuroAccord13]

http://www.ozhonda.com/forum/showthread.php?t=10827

Here have a read of my test.

[Crapdaz]

Good test reading it again.

i am so bummed i bought a K&N apollo intake ROFL!!!