Results 1 to 12 of 19

Threaded View

  1. 06-10-2008 11:12 PM #5
    Moya
    Moya is offline
    Member Array
    Join Date
    Apr 2005
    Car:
    EG
    Quote Originally Posted by bennjamin View Post
    yup as above.

    the "knuckle" is the metal arm which connects to both the UPPER and LOWER control arm. The brake hub plus disc n caliper is connected directly the the knuckle.

    The reason you need a new knuckle , is because the 2 mounting holes for the larger discs (262 or 282mm) is slightly off the standard eg knuckle (for 242)
    benjamin do you know what the cheapest way to run ITR 282mm rotors but keep 4x100?

    I already have rear DC2 discs and ITR 1" booster/MC. But front on my EG is still stock so I want to give them a big upgrade but keep 4x100.

    Wilwood are too much (too effective, and too expensive). Oh I also need to do 4040 prop valve but I've been too lazy and I'm not sure which one I need because I don't have ABS and apparently the 4040 prop valve is for ABS?
    Last edited by Moya; 06-10-2008 at 11:15 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.