GReddy Kit + D16Y1 SOHC VTec E-manage Untuned = 97.5WKW Not Bad!!

**Sexc86** · 18-10-2008 07:31 AM

There is no Replacement for Displacement EXCEPT forced induction!

**Lukezen27** · 18-10-2008 09:08 AM

Originally Posted by Sexc86

There is no Replacement for Displacement EXCEPT forced induction!

lol Lyle

**Limbo** · 18-10-2008 06:49 PM

FI pretty much is a kind of Displacement. The Turbo acts like an extra 2 cylinders!

**mooshie** · 20-10-2008 09:23 AM

Whenyou had issues with the headgasket, and then got it replaced, did you notice any improvement in cooling too?

**Lukezen27** · 20-10-2008 09:28 AM

Originally Posted by mooshie

Whenyou had issues with the headgasket, and then got it replaced, did you notice any improvement in cooling too?

Sure did

Hever gose above half way now

**Lukezen27** · 06-12-2008 04:16 PM

New power figures after EBC installed..

As you can now see the boost is holding nicely too red line..

old

New

The numbers are a bit miss leading due a very hot day on the dyno...

Real numbers are more like 130-132 I believe

**Fo55il** · 06-12-2008 05:05 PM

luke u gave me stiffy lookin at that

**mooshie** · 06-12-2008 10:10 PM

Am I reading it right? Full boost comes on at 4200rpm? That would be pretty laggy, nice smooth curve though and the boost is holding firm.
Can you post up your old graph so we can compare side to side?

**Lukezen27** · 07-12-2008 07:51 AM

Originally Posted by mooshie

Am I reading it right? Full boost comes on at 4200rpm? That would be pretty laggy, nice smooth curve though and the boost is holding firm.
Can you post up your old graph so we can compare side to side?

Done but old one hasn't got the PSI

Yeah your reading it right but its only a bush turbo not a ball bearing turbo..

**mooshie** · 07-12-2008 08:00 AM

Interesting, I am amazed at the difference, not only more power overall, but looks better throughout the rev range.
Must feel smoother too. How much tuning was required when you fit the EBC?

**Lukezen27** · 07-12-2008 08:12 AM

Originally Posted by mooshie

Interesting, I am amazed at the difference, not only more power overall, but looks better throughout the rev range.
Must feel smoother too. How much tuning was required when you fit the EBC?

Yeah it feels a lot better

Complete re-tune was needed