the first number is the cold start viscosity rating the oil has, the lower the number the faster it flows at cold start (ie better - less thick)
the second number is the operating temperature viscosity of the oil.. dependent on operating conditions you will be running at usually... 30 is within reason... (the higher the number the thicker the oil will be)


"At the low-temperature end, oil has to be resistant to thickening so that it flows more easily to all the moving parts in your engine. Also, if the oil is too thick the engine requires more energy to turn the crankshaft, which is partly submerged in a bath of oil. Excessive thickness can make it harder to start the engine, which reduces fuel economy. However, synthetic oils can be formulated to flow even more easily when cold, so they are able to pass tests that meet the 0W rating.

Once the engine is running, the oil heats up. The second number in the viscosity rating--the "40" in 10W-40, for example--tells you that the oil will stay thicker at high temperatures than one with a lower second number--the "30" in 10W-30, for example. What's really important is that you use the oil viscosity your car's owner's manual recommends."

sounds about right?