Page 10 of 27 FirstFirst ... 7891011121320 ... LastLast
Results 109 to 120 of 322
  1. #109
    Member Array
    Join Date
    Aug 2004
    Location
    Sydney Harbour Bridge
    Car:
    03 CL9 Euro
    Quote Originally Posted by MiSloVic View Post
    yes, if your setup is the same.. the map can be saved into a PC file and imported into the other car.
    The reason why it is not recommended to share tuning is because each car/modder will have different modification setups, so it's better to have it tuned to your car spec rather than in similiar spec to hondata reflash how its a one app fit all.
    vTeK 4-Life!
    FOR SALE: CL9

  2. #110
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    If the tune is aggresive at 8/10, then you might be ok sharing maps with the same parts. But if the tune was extracting 10/10 of the power where there is very little room for error, then sharing the map is not advisable.
    --------------------------------------
    Stocky CL9 - 1:17.2

  3. #111
    Member Array
    Join Date
    Aug 2004
    Location
    Sydney Harbour Bridge
    Car:
    03 CL9 Euro
    hm.... yeh it sounds alright to do.

    But unless you base it on two cars who have different mods and have initial dyno baseline, then apply the tune and see the difference. No one will ever know if it is advantageous or not.
    vTeK 4-Life!
    FOR SALE: CL9

  4. #112
    Member Array
    Join Date
    Jun 2007
    Location
    ACT
    Car:
    Accord Euro Luxury
    Quote Originally Posted by aaronng View Post
    If the tune is aggresive at 8/10, then you might be ok sharing maps with the same parts. But if the tune was extracting 10/10 of the power where there is very little room for error, then sharing the map is not advisable.
    ^^^ agreed....

    id only run someone else tune with a wideband o2 sensor monitoring your fueling levels...

  5. #113
    Member Array
    Join Date
    Jul 2005
    Location
    Sydney, WPH
    Car:
    Integra DC5 Type R '03
    just picked up the emanage ultimate.
    Last edited by BusterSonic12; 02-12-2008 at 09:18 PM.
    '03 Integra DC5 Type R

    Wakefield Park: 1:13.047 w/ street tyres
    Eastern Creek Int'l Raceway: 1:57.969 w/ street tyres
    Power: 155Kw with Mugen N1 ECU

  6. #114
    Member Array
    Join Date
    Aug 2004
    Location
    Sydney Harbour Bridge
    Car:
    03 CL9 Euro
    Quote Originally Posted by BusterSonic12 View Post
    just picked up the emanage ultimate.
    how much for? PM me.
    vTeK 4-Life!
    FOR SALE: CL9

  7. #115
    Member Array
    Join Date
    Jul 2005
    Location
    Sydney, WPH
    Car:
    Integra DC5 Type R '03
    Quote Originally Posted by crapdaz View Post
    how much for? Pm me.
    $675.
    '03 Integra DC5 Type R

    Wakefield Park: 1:13.047 w/ street tyres
    Eastern Creek Int'l Raceway: 1:57.969 w/ street tyres
    Power: 155Kw with Mugen N1 ECU

  8. #116
    Member Array
    Join Date
    Aug 2004
    Location
    Sydney Harbour Bridge
    Car:
    03 CL9 Euro
    nice.... used and abused or brand new?
    vTeK 4-Life!
    FOR SALE: CL9

  9. #117
    Member Array
    Join Date
    Jul 2005
    Location
    Sydney, WPH
    Car:
    Integra DC5 Type R '03
    Quote Originally Posted by Crapdaz View Post
    nice.... used and abused or brand new?
    i bought it from a member on clubitr, but it is brandnew, still had wrapping and stickers and everything on it, no finger print on it at all i need to save up for the wiring now
    also, just wondering where do you guys mount your emanage? photos?
    Last edited by BusterSonic12; 02-12-2008 at 10:50 PM.
    '03 Integra DC5 Type R

    Wakefield Park: 1:13.047 w/ street tyres
    Eastern Creek Int'l Raceway: 1:57.969 w/ street tyres
    Power: 155Kw with Mugen N1 ECU

  10. #118
    Member Array
    Join Date
    Aug 2004
    Location
    Sydney Harbour Bridge
    Car:
    03 CL9 Euro
    Quote Originally Posted by BusterSonic12 View Post
    i bought it from a member on clubitr, but it is brandnew, still had wrapping and stickers and everything on it, no finger print on it at all i need to save up for the wiring now
    also, just wondering where do you guys mount your emanage? photos?
    haven't mounted mine best to PM kitbkk
    but if i were to i would mount mine on the passenger side near the foot next to the console wall exterior next to where the ECU is meant to go cause at least that would give you room to tuck the greddy harness as it's about 50cm long.
    vTeK 4-Life!
    FOR SALE: CL9

  11. #119
    I put mine in the glovebox. I found the harness was annoying taking the space behind the ecu. Gotta remove the ecu wire mounting as well.
    あなたは小さい陰茎を持っている?

  12. #120
    Member Array
    Join Date
    Aug 2004
    Location
    Sydney Harbour Bridge
    Car:
    03 CL9 Euro
    Quote Originally Posted by kitbkk View Post
    I put mine in the glovebox. I found the harness was annoying taking the space behind the ecu. Gotta remove the ecu wire mounting as well.
    Reason for me to have it there is cause i have my EDFC cabling tucked in there cause there is no other space i can hide it.
    vTeK 4-Life!
    FOR SALE: CL9

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.