well its the only new 250 out there apart from the hyosung.
if your after something modern looking and can afford it then go for it.
go sit on one and ride it around see if you like it.
personally i wouldnt spend 7k for one but if it was in a good price range i would definitely grab one. actually looking for a 2nd hand one for the missus. looks great but sounds like a tractor at low rpms (2 cylinders rather than 4)
What should I be looking out for in used bikes. You guys have any pointers on what to keep an eye on. Ive been told anything with a taco that has numbers that dont line up is likely wound back... what else should I be looking out for?
What should I be looking out for in used bikes. You guys have any pointers on what to keep an eye on. Ive been told anything with a taco that has numbers that dont line up is likely wound back... what else should I be looking out for?
Just general bike condition.
Things like a new chain and sprockets will cost you a few hundred. Check that they are adjusted correctly, as if overtightened, can cause serious problems. Good check to see if the OP has got an idea about their bike.
Check for wheel bearing free play. Try to wobble wheels from side to side.
Bearings cost heaps to replace. Ask about if they have ever greased up the bearings. Like swing arm and head stem bearings.
Check frame for cracks.
Tyre condition is a good indicator on how the bike has been ridden. You want to see 'chicken strips' LOL! Tyres cost a few hundred too, so new is nice.
Ask about servicing, and what they do to maintain their bike. It is easy to pick someone who loves their bike and takes good and proper care for it, and the ones who have NFI. Check the air filter. If it's dirty, that is a good indication that they don't care about their bike.
If you get a bad feeling about the bike, walk away. Plenty out there.
Reply With Quote
Honbra
Originally Posted by Twincam16
Bookmarks