wheels for CU2

[tony1234]

Umm what Rims are on the Cu2, they look pretty good??

yeah,i like them too.They look like BMW M3 rims

[Sludge]

I've seen that photo before, it is an Acura in the States so not sure if the wheel would even be available here.

And a 22' wheel!!!! You would need to fit a 25 profile rubber band to get close to maintaining the correct wheel circumference. Ouch!

[buddah51au]

I've seen that photo before, it is an Acura in the States so not sure if the wheel would even be available here.

And a 22' wheel!!!! You would need to fit a 25 profile rubber band to get close to maintaining the correct wheel circumference. Ouch!

Correct......totally impractical

[Type R Positive]

I've seen that photo before, it is an Acura in the States so not sure if the wheel would even be available here.

And a 22' wheel!!!! You would need to fit a 25 profile rubber band to get close to maintaining the correct wheel circumference. Ouch!

That's a 20" wheel.

Belongs to fritoLay on Acurazine.
http://tsx.acurazine.com/forums/showthread.php?t=689446

[Sludge]

The caption says 22', but yes they do look more like 20's.

The tires don't look like 35's though, does the Acura run a different configuration to the Euro?

[Type R Positive]

The tires don't look like 35's though, does the Acura run a different configuration to the Euro?

No. Just same size 17's as our base.

[arthhtra]

Hi, was browsing another thread saying the offset for the CU 2 is + 55.

Any ideas if Vertini - Hennessy fit well (18x8) Saw this in a magazine

http://www.ozzytyres.com.au/Content_...s_Hennessy.seo

Just curious. Any good Wheel places in brissy? Ive read tons of nightmare stories with ozzy and tempe...

[tony1234]

Hi, was browsing another thread saying the offset for the CU 2 is + 55.

Any ideas if Vertini - Hennessy fit well (18x8) Saw this in a magazine

http://www.ozzytyres.com.au/Content_...s_Hennessy.seo

Just curious. Any good Wheel places in brissy? Ive read tons of nightmare stories with ozzy and tempe...

I'd stay away from Ozzy and Tempe tyres.

[Sludge]

Hi, was browsing another thread saying the offset for the CU 2 is + 55.

Any ideas if Vertini - Hennessy fit well (18x8) Saw this in a magazine

http://www.ozzytyres.com.au/Content_...s_Hennessy.seo

Just curious. Any good Wheel places in brissy? Ive read tons of nightmare stories with ozzy and tempe...

Mate one look at the lip on those I'd say no way they will fit over the front brakes, even if they are a 55 offset, which I doubt.

These are mine, they are a similar style and they fit (18x8 45 offset).



Tenzo Type M

Taleb Tyres fitted them and they stock them, however I didn't deal direct with them I purchased them through a third party XDC Automotive in Sydney and they were great in finding a wheel for me that both fits and is legal.

Good luck, I found it a very frustrating experience (4 months) finding the right wheel.

[denot]

Guys, any1 kno what are the minimum Tyre Load rate for CU2?

[Type R Positive]

Guys, any1 kno what are the minimum Tyre Load rate for CU2?

placard says 98.

[denot]

thanks Type R... my question was asked before I purchase the CU2 and now I have the info already

anyway, refering to Buddah on the 1st post of this thread, 235/35/19... I cant seem find any with 98+ load rate... is it true if hte wheels is bigger, we can use lower load rate?