2009 cu2 Euro 2 in 1 MOD

[Euro_CU2]

Very nice but i think there was another post by someone else with a CU2 and detailed info and more pics..

I might be wrong but im pretty sure i saw it but cant remember the post.. As i wanna change all the interior lightings to white LED's etc.... Like nesterjester stated he had done already.

[nesterjester]

All the LED's do make a difference, but I did find the interior lighting wasn't as bright as the stockies, but it was a cosmetic choice.
All up there are a quite a few lights in the EURO! and can be costly if you purchase them all at once.
But a def IMO.

[denot]

All the LED's do make a difference, but I did find the interior lighting wasn't as bright as the stockies, but it was a cosmetic choice.
All up there are a quite a few lights in the EURO! and can be costly if you purchase them all at once.
But a def IMO.

hey bro, help us out by listing the buble sizes we need to replace the interior lights? cheers

[Euro_CU2]

All the LED's do make a difference, but I did find the interior lighting wasn't as bright as the stockies, but it was a cosmetic choice.
All up there are a quite a few lights in the EURO! and can be costly if you purchase them all at once.
But a def IMO.

Yeah for cosmetics is what i think looks nice as well..... Just different but i guess that with all Mods you do on a car...

More info regarding Bulbs if possible ...

[nesterjester]

Here are the bulb sizes for the guys who are interested;
Working from the front of the car to the back:

Low beams - H1
Fog Lights - H11
High beams - HB3
Parkers - T10 5W Wedge Bulb
Door lights - T10 5W Wedge Bulb
Map lights - Festoon Dome 31mm-35mm LED Bulb (Your choice between 31mm and 35mm)
Vanity lights - Festoon Dome 31mm-35mm LED Bulb (Your choice between 31mm and 35mm)
Rear Dome Light - Festoon Dome 31mm-35mm LED Bulb (Your choice between 31mm and 35mm)
In-boot light - T10 5W Wedge Bulb
Rear number plate light - T10 5W Wedge Bulb
Rear Brake light - T20 12V LED Wedge Bulb
Reverse lights - T20 12V LED Wedge Bulb
Rear Indicators - T20 12V LED Wedge Bulb

*Not to sure about the brake light on the parcel shelf. I didn't end up changing them as well as the front indicators, and mirror indicators.

[Euro_CU2]

Here are the bulb sizes for the guys who are interested;
Working from the front of the car to the back:

Low beams - H1
Fog Lights - H11
High beams - HB3
Parkers - T10 5W Wedge Bulb
Door lights - T10 5W Wedge Bulb
Map lights - Festoon Dome 31mm-35mm LED Bulb (Your choice between 31mm and 35mm)
Vanity lights - Festoon Dome 31mm-35mm LED Bulb (Your choice between 31mm and 35mm)
Rear Dome Light - Festoon Dome 31mm-35mm LED Bulb (Your choice between 31mm and 35mm)
In-boot light - T10 5W Wedge Bulb
Rear number plate light - T10 5W Wedge Bulb
Rear Brake light - T20 12V LED Wedge Bulb
Reverse lights - T20 12V LED Wedge Bulb
Rear Indicators - T20 12V LED Wedge Bulb

*Not to sure about the brake light on the parcel shelf. I didn't end up changing them as well as the front indicators, and mirror indicators.

Legend.... cheers for the above info....

[BE.10.WU]

Did you have to put load resistors on the rear indicators?

[nesterjester]

Did you have to put load resistors on the rear indicators?

i did not ... on a further note .. i have not had any problems ...

[wolfwood_]

Hey nesterjester,

What is a good brand of globes for your h1 and h11? Are they HID Xenons? Any recommendations?

Also was it hard to change your fog lights, cause you have to take out the guards to get to them?

[Shuuyuki]

hey guys i was thinking of replacing the rear plate blubs with the t10 5w white bulbs manually. Is there an installation guide or video on how to replace them i cant even get to my bulbs to replace them. And also it might be dumb but what does the 5w mean is it 5 watts

[MR_LATE]

5w is 5 watts, your manual should show u how to change the plate bulbs. trick at first cz its on an angle but patience.
also make sure the t10 bulb isnt too long cz there is much room there, also get a bulb that disperses light in all angles not just a straight or else half the light will be wasted.

[Shuuyuki]

5w is 5 watts, your manual should show u how to change the plate bulbs. trick at first cz its on an angle but patience.
also make sure the t10 bulb isnt too long cz there is much room there, also get a bulb that disperses light in all angles not just a straight or else half the light will be wasted.

Thanks mr late. Kinda had problems with replacing the rego lights as they wouldn't hold in place.

Also I wanted to ask for the low beam lights do i get the h11 bulbs or is it the d2s bulbs I have a luxury cu2 model