Your wheel sizes for FD Civic

[ekdez]

i got some "short work" ones from one of the traders in black.
these are pretty good i reckon.. you get 4 wheel nuts and 1 lock nut as you want..

but reason i like these is because,
standard honda wrench shape wont screw or undo the 4 wheel nuts, i had to dig into my torque wrench kit to get a correct fitting one.. probably because, the holes which the nuts fit into on the wheel, are too small for both the nut and wrench to fit so i needed a smaller diameter piece to screw it in.

dunno if that makes sense.. hope it helps tho.

[aero]

I use some buddyclub ones... costed me 180 though.. and doesn't include any lock nuts.

But since it's black I thought I'd let you know... and they are extended and hollow.. so look nice imo:

did u get those nuts from 999 automotive up here in brissy?

[Shimian]

i got some "short work" ones from one of the traders in black.
these are pretty good i reckon.. you get 4 wheel nuts and 1 lock nut as you want..

but reason i like these is because,
standard honda wrench shape wont screw or undo the 4 wheel nuts, i had to dig into my torque wrench kit to get a correct fitting one.. probably because, the holes which the nuts fit into on the wheel, are too small for both the nut and wrench to fit so i needed a smaller diameter piece to screw it in.

dunno if that makes sense.. hope it helps tho.

Sweet. Ill look into the Works lugs. Im worried that it may not fit if i get short ones. I need 12X1.5s to fit my Civic FD with offset +42

Mark: cheers

[Stig]

hey does anyone know what the centre bore of our rims/wheel/disc thing are? 64.1mm?

[blasdf]

just checked out an FD that parks up at my place, thought I would seeing i was taking recycling and wanted to see what he's done.

running 20" rims, 225/30 profile tyres. sits just up under the guards, so perhaps flared. seen the car around for a year or so, so he isn't having many problems with the rims like others have mentioned.

be interesting to find out what else this guy has done, has a big exhaust, all chrome edging everwhere. looks quite nice.

[bodaas]

just want to share,

my wheel wrecked the whole plastic guard inside and dented the front guard after few months lol

front right





and the rear looks like

[Wayne]

guys.. need some help.. my fren planning to let go his wheels for me.. but i dont know whether the size of the wheels and tyres are fit to my FD2.. the size is as follow:

19×8.0J　OFF＋48　5H　PCD114.3

225-45-R19

the wheel should be no problem i reckon.. but the thickness of the wheels will it be a problem? anyone can help?

[black8thgen]

shud be fine... except tyers are too thick i reckon. wuold screw ur speedo over wouldnt it

[Wayne]

what u mean by screw the speedo? u mean will slow? now the problem i afraid is cant fit in to FD2.. or maybe will scratch the fenders.. =(

[kazam]

just want to share,

my wheel wrecked the whole plastic guard inside and dented the front guard after few months lol

front right





and the rear looks like

LOL mannn if i was 2 show u my gaurds and the plastic sh1t beneath it, evry1 would cry lol its hella fvcked up... did u end up rolling gaurds?

[FallenAngel]

just want to share,

my wheel wrecked the whole plastic guard inside and dented the front guard after few months lol

front right





and the rear looks like

Ouch!! get your guards rolled lol

guys.. need some help.. my fren planning to let go his wheels for me.. but i dont know whether the size of the wheels and tyres are fit to my FD2.. the size is as follow:

19×8.0J　OFF＋48　5H　PCD114.3

225-45-R19

the wheel should be no problem i reckon.. but the thickness of the wheels will it be a problem? anyone can help?

What is ur suspension setup? Springs, coils etc?

[Wayne]

stock.. but planning to low down with TEIN lower spring.. will it fit?