euro CL9 cuzco tower bar

**learner** · 02-03-2005 06:45 PM

got the cuzco tower bar for CL9 today... ==not the one for CL7==.
will install it next week.
will post pic later.

saw the manual... no need to remove anything.
shouldnt be a problem to install it

**euro77** · 02-03-2005 06:58 PM

would be good if you can write up on how to install it as well.
where do you get it btw?

**baboo** · 02-03-2005 07:09 PM

I want some lower arm braces...

Cusco do sway bar too?

**learner** · 03-03-2005 02:38 AM

yea... cuzco do have lower arm brace for CL9 as well
is da same price as tower bar...
P.S. lower arm brace is for CL9... not the one for CL7....
the guy said you can't fit the CL7 lower arm brace on CL9.

there also have anti-roll bar for euro... but it cost around AU$800.

i am in overseas at the moment, i got them from overseas.

**cmf** · 03-03-2005 04:03 AM

Wow, good info. How about a rear sway. Do they have one of those available?

**learner** · 03-03-2005 04:39 AM

Originally Posted by cmf

Wow, good info. How about a rear sway. Do they have one of those available?

sway bar = anti-roll bar = anti-sway bar = lower tie bar = stabilizer bar
http://www.tuninglinx.com/html/a_bars.html
ppls just call it differently

**SSML** · 03-03-2005 07:41 AM

Originally Posted by learner

got the cuzco tower bar for CL9 today... ==not the one for CL7==.
will install it next week.
will post pic later.

saw the manual... no need to remove anything.
shouldnt be a problem to install it

The nuts for the strut bolts can be very tight to undo with hand tool.
if u getting the tower bar fitted at shop, maybe ask them not to torque up too tight with air-gun, otherwise v difficult to undo in the future.
If DIY, make sure u hold the deep socket kit down vertically when uturn the rachat, so u dont get force at an angle which can snap the bolt. (that's what happened to me

)

oh, one stupid Q, Australian accord euro = CL9? then what's CL 7? is it Thai made US version Accord?

**learner** · 03-03-2005 07:58 AM

Originally Posted by SSML

The nuts for the strut bolts can be very tight to undo with hand tool.
if u getting the tower bar fitted at shop, maybe ask them not to torque up too tight with air-gun, otherwise v difficult to undo in the future.
If DIY, make sure u hold the deep socket kit down vertically when uturn the rachat, so u dont get force at an angle which can snap the bolt. (that's what happened to me

)

oh, one stupid Q, Australian accord euro = CL9? then what's CL 7? is it Thai made US version Accord?

9999 thx for da info SSML...

CL9 = euro 2.4
CL8 = euro 2.0
CL7 = euro-R
CM2 & CM3 = euro wagon

**learner** · 04-03-2005 02:39 PM

here are some pic of da tower bar

**cmf** · 23-03-2005 06:52 AM

So what is a lower arm or lower arm brace? I got pricing from boomplustoys of 89USD for lower arm, and 179USD for strut tower bar. Still waiting for pricing for rear sway.