[Euro] Brake pad replacement

[BusterSonic12]

are dixcel type m for track or street?

i think it's more of a street pad, but the type z was out of stock so i thought i will give these one a try. they are rated 0-500.

what's the temp rating for the stock pads?

[tony1234]

i think it's more of a street pad, but the type z was out of stock so i thought i will give these one a try. they are rated 0-500.

what's the temp rating for the stock pads?

350C for stock pads i think.

[zaqmlp]

are dixcel type m for track or street?

Type M is for street use, but its reasonbly better then stock. For performance pads, type-z would be your choice! And if you want hardcore, Type-R are available which is stated as for competiton use.

[aaronng]

Just wanted to let you guys know that I found a local dealer that sells Hawks, Ferodo, Endless, Stoptech, AP Racing and DBA. They are located near WSID at Arndell Park, just off Resevoir Road on the Blacktown side.

Got my rotors through them and it cost $100 less than the price I got from Bursons. They also do ADR-approved Goodridge braided brake lines for the Euro. Price is reasonable as well.

Edit: Old age is catching up to me. Site is www.vsport.com.au as pointed out by enkay.

[enkay]

Just wanted to let you guys know that I found a local dealer that sells Hawks, Ferodo, Endless, Stoptech, AP Racing and DBA. They are located near WSID at Arndell Park, just off Resevoir Road on the Blacktown side.

Got my rotors through them and it cost $100 less than the price I got from Bursons. They also do ADR-approved Goodridge braided brake lines for the Euro. Price is reasonable as well.

haha www.vsport.com.au =D
yer i got some quotes from them too, but no money atm for brake stuff

[aaronng]

haha www.vsport.com.au =D
yer i got some quotes from them too, but no money atm for brake stuff

Dammit, I can't believe I forgot the link. ahhaha

Stop buying expensive parts, then you can afford brakes. ahha

[enkay]

Dammit, I can't believe I forgot the link. ahhaha

Stop buying expensive parts, then you can afford brakes. ahha

haha nah actually ive just been buildin a new comp for my room / some home theatre stuff

but im back to saving for my car again =D

[tony1234]

Just wanted to let you guys know that I found a local dealer that sells Hawks, Ferodo, Endless, Stoptech, AP Racing and DBA. They are located near WSID at Arndell Park, just off Resevoir Road on the Blacktown side.

Got my rotors through them and it cost $100 less than the price I got from Bursons. They also do ADR-approved Goodridge braided brake lines for the Euro. Price is reasonable as well.

Edit: Old age is catching up to me. Site is www.vsport.com.au as pointed out by enkay.

Interesting!Can you post up prices of what you got?What about brake fluid any suggestions?something better than OEM?............thx.

[enkay]

okay prices i got for the stuff i wanted are:

Goodridge lines F&R: $224
Hawk ceramic pads: $194(front) $142(rear)

thats all i asked for

[aaronng]

Interesting!Can you post up prices of what you got?What about brake fluid any suggestions?something better than OEM?............thx.

I got DBA4000 front rotors (blanks) for $162 each and DBA street rear rotors (blanks) for $90 each.

I got quoted $225 for the Goodridge ADR-approved brake lines. Good price considering the non-ADR ones are already $150-170 from Ebay landed here.

They respond very quickly via email as well.

[tony1234]

I got DBA4000 front rotors (blanks) for $162 each and DBA street rear rotors (blanks) for $90 each.

I got quoted $225 for the Goodridge ADR-approved brake lines. Good price considering the non-ADR ones are already $150-170 from Ebay landed here.

They respond very quickly via email as well.

Thanks Aaron.Good prices.What about brake fluid?Do You/they recommend any?

[Crapdaz]

nice find guys...