EP3 Type R

[Nepolian]

i reckon 200kw, if u could get that with bolt ons and keep it NA ill buy u a set of spoon calipers

^^^ Are you talking about flywheel or atw??

200atw with just bolt ons is not possible! The toda built one with cams, toda stroker, itb's etc....only made in the vicinity of 185kwatw. Good indication of what it wont make with bolt ons!

hi did anyone install hid for ur ep3?i bought a set in firesport and it doesnt work to mine,is that cuz im unlucky to get some dumb hid or anything else...so upset

Are you talking about the std H4 style or have you got JDM HID already. If the std H4 style should work, double check the wiring!

[Perry]

$$$ to get 2.0L to 200kw even at fly LOL!!!

Trust me I know

If I had my time again, I'd go 2.4L straight up!

Are you selling up?

[Mugen_B16B]

^^^ Are you talking about flywheel or atw??

200atw with just bolt ons is not possible! The toda built one with cams, toda stroker, itb's etc....only made in the vicinity of 185kwatw. Good indication of what it wont make with bolt ons!



Are you talking about the std H4 style or have you got JDM HID already. If the std H4 style should work, double check the wiring!

im talking not possible 200kw atw of course, at the fly i think its possible to reach 200 with bolt ons and kpro

[Nepolian]

Are you selling up?

Nah, just cleaning out some unused stuff...spent too much money already, may as well enjoy it!

im talking not possible 200kw atw of course, at the fly i think its possible to reach 200 with bolt ons and kpro

^^ Then you owe me some spoon calipers

[ITRDC2]

^^^ Are you talking about flywheel or atw??

200atw with just bolt ons is not possible! The toda built one with cams, toda stroker, itb's etc....only made in the vicinity of 185kwatw. Good indication of what it wont make with bolt ons!



Are you talking about the std H4 style or have you got JDM HID already. If the std H4 style should work, double check the wiring!

hi, thanks, but its 02 model, so it doesnt come with std hid right, i've been tested the high beam works but not the low beam, the low beam just flash abit then off and when u turn on again it just keep like flashing a few sec then off again. so strange. and also i think for the ep3s they have the problem that they all have a soft plastic cover for the std headlight, and i found it not possible to put in again once you install the aftermarket hid cuz so many wiring.

[Philip Lee]

does your car has rear privacy glass, power folding side mirrors, rear screen wipers etc?

if so then your is a C package and should have HID standard. the RAW has taken them off during compliance.

[Nepolian]

hi, thanks, but its 02 model, so it doesnt come with std hid right, i've been tested the high beam works but not the low beam, the low beam just flash abit then off and when u turn on again it just keep like flashing a few sec then off again. so strange. and also i think for the ep3s they have the problem that they all have a soft plastic cover for the std headlight, and i found it not possible to put in again once you install the aftermarket hid cuz so many wiring.

Did the originbal H4 beams work properly. If so, it may be the wiring or the ballast on the hid.

I have plastic ones, its almost two years now and its dtill fine!

Wiring whe the HID are put in are quite messy. Not too bad when you tidy it up a little as best you can.

[ITRDC2]

oh yeah i have all of them...damn, that so helpful, so what hid size do i need?and what i need to change?cuz i bought the h4

[ITRDC2]

Did the originbal H4 beams work properly. If so, it may be the wiring or the ballast on the hid.

I have plastic ones, its almost two years now and its dtill fine!

Wiring whe the HID are put in are quite messy. Not too bad when you tidy it up a little as best you can.

but the hole on the cover is so small, how can u put thru the hid wires???

[Philip Lee]

but the hole on the cover is so small, how can u put thru the hid wires???

u'll probably need to drill a bigger hole.

[Philip Lee]

oh yeah i have all of them...damn, that so helpful, so what hid size do i need?and what i need to change?cuz i bought the h4

so your car should have factory HID.

i guess you don't have the factory ballast etc?

if not then probably an aftermarket H4? how did you wire up from oem plug to your new ballast? i guess this is the biggest problem, as wiring from ballast to bulb should be straight forward.

[ITRDC2]

u'll probably need to drill a bigger hole.

but it is the oem one....i dont want to drill a hole u know... let me know how u guys install ur HIDs in??and how u guys do with that cover, or u guys dont come with that cover?