Complementing the K20

[xtercii]

no everything else is standard...Rcrew 3in exhaust, AEM intake and SSR header....

[2002 TeGgY]

oh ok, very nice...jdm k20 ftw

[rpm boy]

difference between jdm and audm k20's? tuning or more

[JDM.Power]

difference between jdm and audm k20's? tuning or more

Jap Spec has : 8400 red line (8900 cut out), 162kW/200Nm (147/192 AUDM), VTC works on both the intake and exhaust cycle (AUDM just intake), variable pressure exhaust sytem

http://www.ozhonda.com/forum/showthr...?t=1822&page=2

[Benson]

yes it's a jap motor, it's tuned by Dave from Insight Motorsport.

[aaronng]

Jap Spec has : 8400 red line (8900 cut out), 162kW/200Nm (147/192 AUDM), VTC works on both the intake and exhaust cycle (AUDM just intake), variable pressure exhaust sytem

http://www.ozhonda.com/forum/showthr...?t=1822&page=2

VTC is only on the intake side for JDM K20A as well.

[JDM.Power]

VTC is only on the intake side for JDM K20A as well.

quoted from the thread.

jdm has a higher comp ratio aswell.

end of the day jdm motors > audm everyone should know this.

[rpm boy]

really, vtc only works on the intake, what a jip, how do i fix this?

[aaronng]

really, vtc only works on the intake, what a jip, how do i fix this?

You can't on a Honda. Until they release a new engine with it.

Quick fix would be to buy an IS250 or an E46/E92 M3 to get VTC on intake and exhaust.

[Type S Tony]

I thought the k20z1 out of the type S has VTC working on both intake & exhaust

[rpm boy]

You can't on a Honda. Until they release a new engine with it.

Quick fix would be to buy an IS250 or an E46/E92 M3 to get VTC on intake and exhaust.

i thought it was only the k24 that had vtc only on the intake.....what a pain, should have built an eg instead, who wants to buy my EP3?

[Type S Tony]

have you posted pics of the EP3 yet?