Page 1 of 3 123 LastLast
Results 1 to 12 of 35
  1. #1
    Account Disabled Array
    Join Date
    Jul 2005
    Location
    REEFTON SPUR
    Car:
    Coupe9;N360;CRX

    Got my eye on some wheels........will they fit?

    I can get some nice wheels for my S2k. Rays 17x8 front, 17x9 rear +45 offset. Will these fit ok? What rubber do I run? I have Eibach lowered springs and thats it. Figure since my 16" rubber is near dead on the rear I may as well get some slightly bigger rims for the street and leave the semi's for track days.

    Thanks in advance.

    JAmes.

  2. #2
    they will fit just fine!

    as for rubber, i suggest 21545/17 or 225/45/17 for front and 245/40/17 or 255/40/17 for the rear

    those wheels specs are what id love to put on my car with the abovementioned tyre specs..

  3. #3
    S2Krazy Array
    Join Date
    Feb 2005
    Location
    Brisbane CBD.
    Quote Originally Posted by ChromZ View Post
    they will fit just fine!
    Agreed.

    Preferred size to run in the good ol' US of A.
    --------------------------------------
    PM's Turned Off

    Prelude - Sold.
    S2000 - Sold.
    NSX - Sold.
    F355 - Coming...

  4. #4
    Member Array
    Join Date
    Sep 2003
    Location
    Sydney
    Car:
    AP2 S2000/CL9 Euro Lux
    Yea should fit fine. Suggest you go with 215 and 245 front and rear respective. I have 225 on the front with a 17X8 +45 rim and it sticks out a tad too much. But some aggresive camber should fix that up.

  5. #5
    Member Array
    Join Date
    Aug 2005
    Location
    west smeobourne
    Car:
    AP1 S13
    They will fit but obviously needs a little bit of guard work
    also I wouldn't recommend running them on springs

  6. #6
    Account Disabled Array
    Join Date
    Jul 2005
    Location
    REEFTON SPUR
    Car:
    Coupe9;N360;CRX
    Quote Originally Posted by vyets View Post
    They will fit but obviously needs a little bit of guard work
    also I wouldn't recommend running them on springs

    Guard work? Like rolling them?

    Thanks for the feedback. Hoping to get them this week!

    As for springs do you think they might rub?

    James

  7. #7
    Member Array
    Join Date
    Aug 2005
    Location
    west smeobourne
    Car:
    AP1 S13
    Yea most likely will have to roll it. depending on what kind of alignment your running. Might as well roll it so you can run some 255's!
    You also will need to relocate the rear bumper tab most likley. Your from the eastside right Jms?
    If so let me know I know a guy around the Springvale area who can roll your guards, for a real good price too and not to mention his really good
    If you roll it you might get away with running springs, but I still wouldn't recommend it they are just too soft to handle aggressive offsets. Not to mention springs are crap anyway :P get some coils I know you'll make good use of it too!

  8. #8
    Member Array
    Join Date
    Aug 2008
    Location
    Northern Beaches, Sydney
    Car:
    S2000 AP1
    Oh why does everyone run staggered offset? I know thats what everyone runs on a street tune S2K. But WHY? Running same f&r offest eliminates any chance of understeer. Get 17x9 +45, with some 255/40's all round. Not only will look aggressive, it will be a turn in monster.

  9. #9
    S2Krazy Array
    Join Date
    Feb 2005
    Location
    Brisbane CBD.
    Quote Originally Posted by JAP-S2K View Post
    Oh why does everyone run staggered offset? I know thats what everyone runs on a street tune S2K. But WHY? Running same f&r offest eliminates any chance of understeer. Get 17x9 +45, with some 255/40's all round. Not only will look aggressive, it will be a turn in monster.
    ^

    You answered your own question.

    I know thats what everyone runs on a street tune S2K. But WHY?
    Not only will look aggressive, it will be a turn in monster.
    --------------------------------------
    PM's Turned Off

    Prelude - Sold.
    S2000 - Sold.
    NSX - Sold.
    F355 - Coming...

  10. #10
    Member Array
    Join Date
    Aug 2008
    Location
    Northern Beaches, Sydney
    Car:
    S2000 AP1
    Quote Originally Posted by ludecrs View Post
    ^

    You answered your own question.
    Ha Ha! true! That's clearly a Wtf back to me???

  11. #11
    Account Disabled Array
    Join Date
    Jul 2005
    Location
    REEFTON SPUR
    Car:
    Coupe9;N360;CRX
    I was gonna run this setup because thats what the rims are. 8" front and 9" rear. The stagger, is it not as good handleing as same all round? I find my turn in is fine. I carry alot of corner speed no problem and the tyres I run seem ok even stock size at the moment.

    All a bit new to me as I have always run FWD Hondas.

    Thanks for all the advice.

    Coil overs............yeah I would love to, but I already have Tein on the CRX, and I need to save for a new garage but yeah, def would love coilovers.

  12. #12
    Newcomer Array
    Join Date
    Aug 2008
    Location
    Sydney
    Car:
    s2000
    hey guys,

    would 7.5" or 8" restrict you from upgrading brakes of any particular brand?
    And if 225 stick out for the front, would it be discouraged to get 215front and 255 rear( besides, perhaps looking quite ridiculous)? --noob.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.