Spoon Racing torque damper for CL7 fit CL9?

**JasonGilholme** · 01-12-2006 07:32 PM

I reckon the results would be similar to engine mounts but not as good.

I wouldn't be a fan of PS hose bending either.

**Chris_F** · 01-12-2006 07:37 PM

Originally Posted by JasonGilholme

I reckon the results would be similar to engine mounts but not as good.

I wouldn't be a fan of PS hose bending either.

hmm true, a guy in the states said he noticed some definite improvements with the ETD installed so I'm hoping the spoon/j's racing ones are just as good...

Might have to see if trav can organise a custom PS line for me to clear this sunnavabitch

**JasonGilholme** · 01-12-2006 07:39 PM

Yeah either custom PS line or a Different bracket......or both. lol

The bracket looks usuable tho.

**Accord Basic** · 12-06-2009 04:13 PM

I have got the Spoon Engine Damper as well. and the bracket is interference with my PS hose. Did someone here got a solution to fix it? I came out some idea, Please advise which one will work?

1/ using a countersunk head screw and place screw head on the side where close to PS hose, it will still touching with the hose but not as bad as using the bolt supplied.

2/ Slot the hole by 3-4 mm on the bracket.

3/ bend the PS hose down or outward from the bracket.

Thanks

**aaronng** · 12-06-2009 04:23 PM

Originally Posted by Accord Basic

I have got the Spoon Engine Damper as well. and the bracket is interference with my PS hose. Did someone here got a solution to fix it? I came out some idea, Please advise which one will work?

1/ using a countersunk head screw and place screw head on the side where close to PS hose, it will still touching with the hose but not as bad as using the bolt supplied.

2/ Slot the hole by 3-4 mm on the bracket.

3/ bend the PS hose down or outward from the bracket.

Thanks

I didn't bother with the Spoon seeing that it would always have problems with the PS hose (which doesn't exist in the CL7), so I went and bought the Ingalls one for CL9 instead. Needed some shaving to accomodate the ABS pump and A/C line but at least it fits straight, unlike the pics above.