Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!
Ok following parts are need to perform this complicated task.
-------------------------------------------------
Phillips Head Screw Driver
Flat Head Screw Driver (Just in case)
2xMacDonalds Cup holder trays (2nd one just in case you damage the first)
Some Scotch Tape
---------------------------------------------------
YOU WILL NEED A TRAY LIKE THIS !!!
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
1) Follow this link and steps to removing the bottom part of the centre console using you screw drivers to unscrew the bolts :
http://www.ozhonda.com/forum/showthread.php?t=13318
2) After you have taken it out the centre console , apply scotch tape to the base of the maccas cup holder trays (For some adhesive base) and spread out the interior trim or carpet where the centre console was previously then shove the cup holders into place like below.
3) Wiggle the cup holders around until it moulds into place and then the final product should be like below.
Simple and effective way of getting a cheap cupholder.
Bookmarks