Cusco Brake Stopper

**beeza** · 15-06-2009 02:17 PM

It came with bolts! and the holes were already there on mine,so no drilling required!

**quadrio** · 19-06-2009 08:46 PM

has anyone ever seen these for a rb2 odyssey??????????????

**T-onedc2** · 19-06-2009 08:54 PM

Originally Posted by quadrio

has anyone ever seen these for a rb2 odyssey??????????????

Cusco site only lists RA1/2 models
http://www.cusco.co.jp/en/pdf/Brake%...pper_honda.pdf

**Bludger** · 22-06-2009 07:54 PM

Originally Posted by riruiz_88

i didnt know that you need a gap between the stopper and the master cylinder. what size gap should you have?

mine is just touching + a lil, lil bit more.

thats how it should be.

there should be no gap.

**riruiz_88** · 22-06-2009 08:16 PM

so it shouldnt be tightened on the brake cylinder, just touching it?

**shadou** · 22-06-2009 08:29 PM

I'm gonna go and say it should be touching and tightened a little not excessively.
I don't have one btw so my comment is void

**beeza** · 22-06-2009 09:58 PM

Yeah,the idea is for zero movement,so it's gotta be nice and firm.Tight.

**Bludger** · 23-06-2009 10:45 AM

Originally Posted by shadou

I'm gonna go and say it should be touching and tightened a little not excessively.
I don't have one btw so my comment is void

like I said, touching + half to one more turn.

no more, no less.

can't get any clearer:s

**Bludger** · 23-06-2009 10:47 AM

Originally Posted by beeza

Yeah,the idea is for zero movement,so it's gotta be nice and firm.Tight.

you can keep turning the bolt and it will never get tight.

or if it does get tighter, your firewall is permanently bent already.

**beeza** · 23-06-2009 01:02 PM

Originally Posted by Bludger

you can keep turning the bolt and it will never get tight.

or if it does get tighter, your firewall is permanently bent already.

Not mine aye Bludger.I remember I could tighten it more than what I expected,but not too much as to cause damage but now mine is as tight as it can go.
I definately believe what U are saying is correct but I know in my case afetr a few turns it is as tight as it could go.

I guess the trick here is to use common sense.Don't just keep tightening it.

**riruiz_88** · 23-06-2009 01:10 PM

yes common sense is tru, you wouldnt tighten it as tight as you could cause the firewall needs to flex a lil bit. i can see where Bludger is coming from, other wise at long distance under high braking force this would could cause damage to your firewall/brake cylinder