Dedicated DA9 Q & A thread

[Chriskoss]

Cant do it bro. Wait til your on member status to post for sale adds.. just go carsales.. 50 bucks well spent. Good luck with sale

[DA9]

Hey i wana put a twin loop exhaust system on my DA i know mugen make them Dose any one else make them 2 suit DAs im also looking at a set of buddy club 4to1 hedders

[DA9B18C]

any buddy club B-series header should fit and as for the twinloop, there was a mugen DA exhaust somewhere along the way but was deff not twinloop.

the twinloop needs a decent amount of room under the rear section which a twinloop might have trouble fitting.

[gbpracing]

Nothing better than a DA9 Ohhh Yehhh

[gbpracing]

I have B18A block with B16a head and TypeR box, if that counts ?
Did you fit the B18c yourself ?

i like this idea!

i would like to know how many b18c da9's are around? i have 1 and i know actionman does too. any one else?

or what other then the stock engines do people have in their da9?[/QUOTE]

[exodus]

Hey i wana put a twin loop exhaust system on my DA i know mugen make them Dose any one else make them 2 suit DAs im also looking at a set of buddy club 4to1 hedders

I think u better double check your muffler clearance because ours is mendral bend... EG, EK or DC they have an arc at the under carriage for the muffler to clear... DA doesn't have that benefit and might scrape your muffler if u lower your car too much and the muffler would or might hang abit low...

As for headers... i think u might have to shave ur cross memeber a little or get a traction bar (>$500) and remove a pieace of support metal that is connected to the stock cross member and chassis...

Regards.

[exodus]

I have B18A block with B16a head and TypeR box, if that counts ?
Did you fit the B18c yourself ?

i like this idea!

i would like to know how many b18c da9's are around? i have 1 and i know actionman does too. any one else?

or what other then the stock engines do people have in their da9?

[/QUOTE]

I have a Da with a Jdm B18C type R motor and gearbox... ^^... i'm selling my car... LOL... join DA crew and take a look at the photos if u want...

Regards.

[DA9B18C]

I have B18A block with B16a head and TypeR box, if that counts ?
Did you fit the B18c yourself ?

i like this idea!

i would like to know how many b18c da9's are around? i have 1 and i know actionman does too. any one else?

or what other then the stock engines do people have in their da9?

[/QUOTE]

In Melb,

1: Actionman - b18c2
2: Da9b18c - B18c2
3: gbpracing - B18c

[gbpracing]

Good to be part of the Integra boys go Gen 2 Tegs... LOL
If anyone is looking for some low ass springs I have some neuspeed 3 inch lowering also a Porsche Boxer rear calipers with alloy hats and bigger disks and adaptor to fit right into the Gen 2 teg. Front only. Easy install great looks !!

[Ashwee]

GBPracing.. where you been hiding with that DA? come along to www.dacrew-au.com/forum for some more info!

[Chriskoss]

GBPracing.. where you been hiding with that DA? come along to www.dacrew-au.com/forum for some more info!

Hey Ashwee,

I just singed up on da-crew

Never knew there was an AU sub-site.. I had trouble signing up for the main one.

Please activate my account :P - account name is DA9nine9

See u on there!

[Ashwee]

Hey mate, I think I've activated you, didn't know if I could do it or not but if its not working for you I will ask A-man on your behalf.