Dedicated DA9 Q & A thread

[DA9]

This may b a stupid question but Im thinking bout rebuilding the motor can i put the B18c Head on A b18a

[A-man]

no its not a stupid question and yes u can

theres two options if u wana cheat and make a race motor this is the better way coz u can put the toda killer cams in and not worry about oil up to the vtec etc.

but if u want vtec to work then u need to tap into the oil gallery and run a line to ur vtec its been done alot of times and there are plenty of kits avalible

search LS/VTEC

[DA9]

Ill look it up thanx

[ZCroofrack]

I'm in the process of doing this conversion at the moment!
Still need to get gaskets, bearings etc.

Linky: http://www.ozhonda.com/forum/showthread.php?t=117195

[A-man]

nice man

y didnt u use a b16 head? then u could get rid of the dual stage manifold

if u want a quick fix for the wiring job i sell complete harness conversions to vtec there very neat and designed for da9s

[ZCroofrack]

Removed the dual runner butterflies, so it's all good.

Pretty sorted in the wiring department, thanks anyways.
If I have any issues I'll shoot you a pm.

[A-man]

np man

good to c more people moddin up the da's

[DA9]

Thnks for the link im either going to do the Vtec conversion or supercharge mine

[DA9]

Hey could i put a k20 in a DA for Less than 12k

[SHOGUNOVDDRK]

Hey could i put a k20 in a DA for Less than 12k

If you do alot of the work yourself and don't get the Ballin' stuff (example, use a alternative radiator, not a new new one) I'm sure its do-able.

One of the members here just finished a 16k K-swap on his EG and that was with Hondata etc etc etc

[A-man]

yeh depends what half cut u get how much u paid for it etc. then what u use for mounts if u make it urself if u wire it urself or get harness's etc.

www.rywire.com
www.hasport.com
etc.

[DA9B18C]

hey guys, im parting after much disapointment. check out my thread.

http://www.ozhonda.com/forum/showthread.php?t=118591