Results 1 to 12 of 69

Threaded View

  1. 17-08-2009 09:16 AM #11
    ECU-MAN
    ECU-MAN is offline
    Green block gangster Array
    Join Date
    May 2004
    Car:
    twin GX160's
    you need to make sure your ecu is wired like this

    http://b16a2.kicks-ass.net/tech/gsrwiring1.gif
    http://b16a2.kicks-ass.net/tech/gsrwiring2.gif

    the above schematic is for a GSR so you ignore Vtec Pressure, VTEC solenoid, IAB, O2 Heater, PSP switch

    if you wire it up with the above schematic you will get it running, If your ED was an auto to start with it will already have the Auto inhibiter on it.


    also on your picture the top right shows 2 connectors and a bunck of loose wires, those loose wires are ment to go to a 3rd connector that connects to the engine at the LH Shock tower.
    Last edited by ECU-MAN; 17-08-2009 at 09:19 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.