Opinions - B18CR Bottom End with Alaniz head

[fatboyz39]

Slaz I really think Tinkerbell is the right guy to do a writeup he was the first to do a B20 in Aus and his engines have proved that you can build a simple engine that will serve you for many years.

[jdm18c]

Slaz I really think Tinkerbell is the right guy to do a writeup he was the first to do a B20 in Aus and his engines have proved that you can build a simple engine that will serve you for many years.

wheres your mechanics licience?

[Slaz]

Slaz I really think Tinkerbell is the right guy to do a writeup he was the first to do a B20 in Aus and his engines have proved that you can build a simple engine that will serve you for many years.

I'll be honest with you guys, you don't need to be a mechanic to know what you're doing when it comes to this side of work. It helps depending on who you are though.

Dave would be a good guy to do a write up on B20's if he could be bothered, maybe the forum or all motor section should have people or moderators involved that could contribute such sticky's that is reliable information for newb's to follow.

As Chris points out also, it isnt rocket science, but beyond alot of people wihtout putting the time into a coarse or trade, but some of the finer points of engine building, cam tuning, degreeing, head porting, part selection are, ive only a met few that have a complete and sound understanding of this and most get by with trial and error, more often then not at other people's expense.

Research, research, research.