wheels for CU2

[taccord12]

i've seen a pic on the acurazine forum, a guy with 20inch on the CU2, it doesn't look big at all, its not a huge difference from 19 to be honest, look wise.

[joyride]

I guess you haven't read the rules on selling shit in the forums...
REPORTED.

take it easy guys, its only the internet.

i didnt see his unedited post so i cant comment on what he wrote. however he is allowed to advertise his FS thread in his signature.

[[ IV 23 VI ]]

I guess you haven't read the rules on selling shit in the forums...
REPORTED.

nice

[aaron]

hey fellas just wanting your advice, ive found this set of 20'' vertini henesseys 8.5'' width, would they fit my cu2 lux and what would be the chances of rubbing once lowered with a eibach pro-kit? and any other problems i should take into account?

[Sludge]

hey fellas just wanting your advice, ive found this set of 20'' vertini henesseys 8.5'' width, would they fit my cu2 lux and what would be the chances of rubbing once lowered with a eibach pro-kit? and any other problems i should take into account?

What offset? I have only ever seen them in 35 offset which would make you illegal. I doubt you would get them under the guards without rolling, you would be coming out 20mm in offset and a further quarter inch in wheel width.

If you are considering lowering you will need an engineers certificate, otherwise illegal in NSW.

Sorry, not trying to rain on your parade, just think its better to dive in with your eyes open.

[Type R Positive]

Seems that you can get them in +42 Sludgy.
Getting 98 load rating tyres for them might be the problem.
I do like them though!

[Type R Positive]

hey fellas just wanting your advice, ive found this set of 20'' vertini henesseys 8.5'' width, would they fit my cu2 lux and what would be the chances of rubbing once lowered with a eibach pro-kit? and any other problems i should take into account?

It would look sick mate... shouldn't be a problem with the right offset.
Might need to roll the guards, but there is plenty of room under there.

Best would be to go to ozzy - tempe - where ever for a test fit when the time comes.

[aaron]

Sludge: what u wrote is exactly what i was expecting, lol all good, um doesnt matter though cos they were bought off ebay before i could make a bid..
Type R postive: cheers bro, ye i like the look of them...ah well might have to settle for 19''s less problems i hope =)

[felixd]

19 " will look big if done right

[felixd]

when I win lotto!

mugen has the only kit, not really any coils out yet, and Jap 20's are expensive.
I'll do it if you want to sponsor me...

It doesnt need to be a mugen do a sport (oem) lip kit and put the 19 " mag wheels VIP wheel with a decent offset n lower it done for ya mate

[felixd]

When is someone going to do a decent CU2?
Put a nice set of Japanese 20's with a low offset?
Set of coils,
And a neat kit?

C'mon guys, You buy a $40k car and ur putting cheap ass 18' $1500 wheels on it?

Stand out from the crowd!

thats right guys its an expensive car i guess wait or save up a lil bit more n get the right ones. its worth it

Or else RICEr will come n get ya

[[ IV 23 VI ]]

It doesnt need to be a mugen do a sport (oem) lip kit and put the 19 " mag wheels VIP wheel with a decent offset n lower it done for ya mate

I wouldnt bother bro