[CL9] Low offset wheels

[[ IV 23 VI ]]

Reins setup is aggressive, The op asked for different low offset setups so I let him know the most aggressive euro setup in oz.

He does not go through tyres every month though, if u have a good wheel alignment and the correct toe, it should last a while.

A Low offset is generally anything in the +20's and lower..

[[ IV 23 VI ]]

what would be a tought offset for an 18x8.5 on a cl9.... i was thinking around +33 - +35?

If on the front a +25- +28 would be tough.. As long as u lower it down.. I have seen this stance with my own eyes on euro..

everyone will move out of your way..

For the rear 8.5 u could fit a +15 now that will look nuts, but I think 8.5 looks a bit skinny for the rear from behind..

Like I said earlier if u want a tough aggressive fitment check out Reins setup, and work from there..

[felixd]

If on the front a +25- +28 would be tough.. As long as u lower it down.. I have seen this stance with my own eyes on euro..

everyone will move out of your way..

For the rear 8.5 u could fit a +15 now that will look nuts, but I think 8.5 looks a bit skinny for the rear from behind..

Like I said earlier if u want a tough aggressive fitment check out Reins setup, and work from there..

LOL it wont look tough it will look like those buggy LOL not safe for those pedestrian too ahaha. offset 33 to 38 r good for the flush and phatt look

i think if u go lesser than offset 30 ull need to consider changing the wheel studs just to be safe.

[[ IV 23 VI ]]

LOL it wont look tough it will look like those buggy LOL not safe for those pedestrian too ahaha. offset 33 to 38 r good for the flush and phatt look

i think if u go lesser than offset 30 ull need to consider changing the wheel studs just to be safe.

Reins, Doesnt look like a buggy..lol

[racerwannabe]

Sorry i should have been a bit clearer with my question..low offset as in low compared to stock around the 40 mark..not insane offset like 25

Anyway I've test fitted the wheels I want and the rubber sticks out maybe 2mm away from the fender and I didnt experience any rubbing..however my car is not that low..

[akina]

Sorry i should have been a bit clearer with my question..low offset as in low compared to stock around the 40 mark..not insane offset like 25

Anyway I've test fitted the wheels I want and the rubber sticks out maybe 2mm away from the fender and I didnt experience any rubbing..however my car is not that low..

Photossss Aaron

Maybe just increase the negative camber a little bit to tuck it in if it bothers you haha
But I guess a little bit is alright, I'm sticking out about 2mm as well on my dc5 lol

[racerwannabe]

Getting the wheels tonight and will wack on some new tyres this weekend..photos will come after..i love these wheels

wot wheels have you put on your DC5 alex?

[akina]

Haha, can't wait to see them
Btw, have you fixed your fender yet? lol

Got some CE28N with +33 offset
Completely owned my rear guards... now its rolled. All good

[Crapdaz]

Haha, can't wait to see them
Btw, have you fixed your fender yet? lol

Got some CE28N with +33 offset
Completely owned my rear guards... now its rolled. All good

did you get your wheel studs replaced or reinforced?

[felixd]

Reins, Doesnt look like a buggy..lol

LOL i know lah i mean when it raised up haha wakakakak

[akina]

did you get your wheel studs replaced or reinforced?

Nope, should be fine

[racerwannabe]

Haha, can't wait to see them
Btw, have you fixed your fender yet? lol

Got some CE28N with +33 offset
Completely owned my rear guards... now its rolled. All good

very nice alex u baller! cant wait to see them at the next meet..dazza hint hint

ive got them now..work vs-xx in gold!