cu2 mods

[taccord12]

yeah me neither, mugen wheels are alright in the 19inch XJ wheel or whatever it's called

20 shouldn't be too ricey providing you drop it properly, any bigger gap it'll just look plain stupid, and obviously decent choice of wheel as well.

i think for 20s you'd need something with a bit of dish to look good... but that's just my 2c

[kimnkk]

Yeah i agree with that. 19" suits the CL9 and the CU2 has pumped wheel arches so i think it needs 20" to get the same look as 19"s on the CL9.

And something with dish, and wide, would look awesome. 9" wide? Hot!

Tien SS Coilovers $1140

Tien Basic Coilvers $855

Which ones do you guys recommend just for someone who is looking to lower their CU2? No tracking or anything, just a decent ride quality while looking a bit low (1.5" lower).

Not sure if it is much trouble to adjust the damper and if i would need to at all so not sure if its worth the extra AU$400 or so on top of the basic ones.

Hmm!!

[greg6510]

I would strongly recommend H&R springs. i use my CU2 for everyday use, including business trips. Drop is perfect, about 35mm front and 30mm back. Will post pics in the next day or two, and you can decide.

[kimnkk]

I would strongly recommend H&R springs. i use my CU2 for everyday use, including business trips. Drop is perfect, about 35mm front and 30mm back. Will post pics in the next day or two, and you can decide.

Awesome pics would be super duper .

Yeah i wouldn't actually mind springs if the ride comfort is okay for everyday use too. Do you find it a lot harsher than stock springs?

Where did you get your springs from if you don't mind me asking?

[greg6510]

I was expecting a harsher ride with the new springs, but honestly, I cannot tell the difference. The ride is still luxurious, and bumps are not felt easily - still very comfortable. I am based in South Africa, so we imported them directly from H&R. I paid an equivalent of USD360 for them, including fitment. No regrets what so ever!

[kimnkk]

Ahh thats awesome to hear! Might check out the H&R springs more then, 1/4 the price of coilovers and since there will be absolutely no tracking, i dont think it would make a difference for me, except to the wallet haha.

Still can't wait to see the pics mate

[greg6510]

Its 8.30pm here, I will arrange that the case be washed tomorrow, and will definately post pics. Theres times, when I just open my garage gate, to stare at my Accord. That drop, with the 19z are so sweet. Cant stop staring!

[kimnkk]

Hey, same time as Germany! Its 9:07pm here atm too

Yeah man your car is gorgeous, i love the rims, they look great on it! Also, looove the colour!! Volcano Grey/Grigio Gray ftw haha!

[greg6510]

Thanks buddy. Are you watching the cricket? NZ vs Pakistan?

[kimnkk]

Thanks buddy. Are you watching the cricket? NZ vs Pakistan?

nah i'm watching a really boring movie, which would explain why i'm still on ozhonda, but not checking it very often.

besides, no cricket on on TV here, and everything is in German so i have nfi what they're talking about .

[greg6510]

Ok, ive uploaded pics on the thread MY CU2 (So far..)

[aaron]

Yeah i agree with that. 19" suits the CL9 and the CU2 has pumped wheel arches so i think it needs 20" to get the same look as 19"s on the CL9.

And something with dish, and wide, would look awesome. 9" wide? Hot!

Tien SS Coilovers $1140

Tien Basic Coilvers $855

Which ones do you guys recommend just for someone who is looking to lower their CU2? No tracking or anything, just a decent ride quality while looking a bit low (1.5" lower).

Not sure if it is much trouble to adjust the damper and if i would need to at all so not sure if its worth the extra AU$400 or so on top of the basic ones.

Hmm!!

mate, i got a set of eibach pro-kits on and they are awesome! i use them everyday, take the family around aswell and no scrubbing issues! looks sweet and feels stock best buy! drop is 1'4'', 1'6''