Page 549 of 1384 FirstFirst ... 494494995395465475485495505515525595996491049 ... LastLast
Results 6,577 to 6,588 of 16607

Thread: EP3 Type R

  1. #6577
    Quote Originally Posted by bigbaby0223 View Post
    Just wondering how fast is the engine speed for EP3 when at 110 kph? Mine is like 3500RPM, is this normal?
    Mine is also like that too...

    Re01r are sickest street tyres!!!
    type[R]

  2. #6578
    Newcomer Array
    Join Date
    Jul 2008
    Car:
    Evo IX and now EP3
    Quote Originally Posted by mtonep3 View Post
    Mine is also like that too...

    Re01r are sickest street tyres!!!
    I am just worried that if I go like that for extended time, it's not good for the car. Cuz Ill be driving down to Melbourne with my wife.

    Aparently the new replacement for RE-01R, the RE-11 is even better. But we cant get them in Australia. I think the Yokohama Neova AD08 has became the best street tire after the HKS Evo X did 0:59 at Tsukuba.
    Last edited by bigbaby0223; 18-12-2009 at 12:04 PM.

  3. #6579
    Member Array
    Join Date
    Feb 2008
    Location
    Brisbane
    Car:
    Dc2 + EG
    Quote Originally Posted by bigbaby0223 View Post
    I am just worried that if I go like that for extended time, it's not good for the car. Cuz Ill be driving down to Melbourne with my wife.

    Aparently the new replacement for RE-01R, the RE-11 is even better. But we cant get them in Australia. I think the Yokohama Neova AD08 has became the best street tire after the HKS Evo X did 0:59 at Tsukuba.
    It will be fine, dc2r's rev much higher at 110kph.

  4. #6580
    Member Array
    Join Date
    Aug 2004
    Location
    Brisbane
    Car:
    Ohthatsit
    Quote Originally Posted by bigbaby0223 View Post
    Funny that, when I had my Evo with Adrenalines, big chunks of rubber started to peel off the tire after one session at Wakefield, maybe it's because Evos are heavier cars. Found a pic for what I mean.
    it looks like you need more negative camber.

    i wouldn't put all the fault on the tyres when alignment wasn't spot on.
    GD3 -> EP3 -> RB3

    FS Rays nuts etc

  5. #6581
    Member Array
    Join Date
    Aug 2004
    Location
    Brisbane
    Car:
    Ohthatsit
    Quote Originally Posted by bigbaby0223 View Post
    I think you are talking about the RE-01R...
    there are jap made RE001 and aus made ones.

    i think he was referring to that.
    GD3 -> EP3 -> RB3

    FS Rays nuts etc

  6. #6582
    Newcomer Array
    Join Date
    Jul 2008
    Car:
    Evo IX and now EP3
    Quote Originally Posted by Philip Lee View Post
    it looks like you need more negative camber.

    i wouldn't put all the fault on the tyres when alignment wasn't spot on.
    My alignment was done at Heasman steering the day before the trackday, my camber was set at -2.5, this is the max you could go on stock Evo suspensions. I suppose it's more to do with Wakefiled being a small and tight circuit with a lot of turns, and Evos being a 1.5 tone car puts a lot stress on the tire when cornering. That being said, I still think the Adrenalines are a little over rated.
    Last edited by bigbaby0223; 18-12-2009 at 12:38 PM.

  7. #6583
    Account Disabled Array
    Join Date
    Apr 2009
    Location
    South Western Sydney
    Car:
    R32 Skyline
    Quote Originally Posted by Philip Lee View Post
    there are jap made RE001 and aus made ones.

    i think he was referring to that.
    Yeh they came with the car when I bought it. They r a really soft compound cause i got only bout 10000 k's then they were down to the wear indicator. I got quoted $265 a corner from bridgestone a little while ago so $205 is pretty gud.

  8. #6584
    Member Array
    Join Date
    Aug 2004
    Location
    Brisbane
    Car:
    Ohthatsit
    Quote Originally Posted by bigbaby0223 View Post
    My alignment was done at Heasman steering the day before the trackday, my camber was set at -2.5, this is the max you could go on stock Evo suspensions. I suppose it's more to do with Wakefiled being a small and tight circuit with a lot of turns, and Evos being a 1.5 tone car puts a lot stress on the tire when cornering. That being said, I still think the Adrenalines are a little over rated.
    fair enough.

    but at the end of the day, these are street tyres and not semis/slick what are built for the track/hard driving.

    also did you look at tyre pressure?

    ps. i have never used RE001 so i dun know but i'll be running some soon. will see how they go.
    GD3 -> EP3 -> RB3

    FS Rays nuts etc

  9. #6585
    Member Array
    Join Date
    Apr 2007
    Location
    Sydney
    Car:
    EP3
    Perry, have you thought of using KU36's or Falken 615's, I rate these above the 001's and pricing is competitive. KU36's I got were $179 each fitted!

  10. #6586
    Member Array
    Join Date
    Apr 2006
    Location
    I'm here right now
    Car:
    JDM K20A
    Quote Originally Posted by bigbaby0223 View Post
    I am just worried that if I go like that for extended time, it's not good for the car. Cuz Ill be driving down to Melbourne with my wife.
    Type r engine is designed to rev high and spin faster. So thats why u'll find its sitting in that rpm range.

  11. #6587
    Member Array
    Join Date
    Jul 2007
    Location
    Sydney
    Car:
    Lollerskates
    Which Injen CAI kit are you guys using? The RSX or Civic Si?

  12. #6588
    Newcomer Array
    Join Date
    Jul 2009
    Location
    Sydney
    Car:
    Trolololley
    Quote Originally Posted by wtfhax View Post
    Which Injen CAI kit are you guys using? The RSX or Civic Si?
    should be for the 02 or 04 civic si hatch.. the dc5 one is too big for our smaller engine bays

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.