EP3 Type R

[Philip Lee]

All u need to do is to take the small plastic trim that cover the coil. Hard to explain
1. first put the 2 back seats down
2. You should be able to see the middle trim when the seats are down the covers it right next the middle trim just give it a small pull it should come off.

there are 2 small round plugs (1 each side) u need to pull out b4 u pull the trim off.

to do that, use something to push the inside circle in and it should be free to pull the plugs off.

[wtfhax]

does anyone know where to get the clips used for the front bar? Repco and supercheap dont have it... Probably have to go to a honda dealer?

[Mugen_B16B]

oem honda only for those

[Philip Lee]

Yeah dealer only and bloody expensive too

[mtonep3]

Hey you guys know if the us civic si ep3 has same engine mounts as us? Thx

[Mugen_B16B]

yeh same mounts, same goes for all dc5/s/r

[pair08]

there are 2 small round plugs (1 each side) u need to pull out b4 u pull the trim off.

to do that, use something to push the inside circle in and it should be free to pull the plugs off.

thanks philip and perry.
got em

[mtonep3]

yeh same mounts, same goes for all dc5/s/r

Aw k thanks! I think I'll be getting a set of back and sides but I dunno if I should change the front, what you guys think?
Especially currency is so good atm, good time to buy from the u.s.

[pair08]

Aw k thanks! I think I'll be getting a set of back and sides but I dunno if I should change the front, what you guys think?
Especially currency is so good atm, good time to buy from the u.s.

imo sides and back should be fine.

but... as mentioned heaps of the time the car vibrates a lot more haha, just something to think about if your getting solid mounts .

[Mugen_B16B]

better then breaking ur stock mounts over and over, and no need for front engine mount unless ur gonna turbo

[NightRyder]

Hey all, any sydney meet happening?

I'm back!

[c01567]

Hey guys, just got an ep3r today thought i'd say hi! prev car was a DC2r.

The cars alot better as a daily with alot more torque and real room in the back. Car's also smaller and easier to park

In syd =).

Also, anyone interested in a Fujitsubo RM01A? exhaust is not my thing :S would be interested in trading for stock jdm EP3 exhaust + cash :P