EP3 Type R

**Mugen_B16B** · 07-02-2010 03:23 PM

Originally Posted by Nepolian

As most of you know, I've had my car for a while and its hard parked as.....right!?

Well.....thought I'll give it a little drive this morning to the shops to get some milk!

Parked it far from any other car, walked 30m into a shop. 5 mins later come back and someone had nudged the front bar! Theres a gash in my lip and paint scraped off the bar.......

Seriously, there is no word that I can use to describe my rage!!

gg man sorry to here, thats life man

was it just ur lip or the whole front bar?

**mizone** · 07-02-2010 04:01 PM

Originally Posted by Mugen_B16B

6 inch will fit straight in depending on the magnet sizeu might need spacers, 6.5 is bigger so u def need spacers

Anyone have any pics of their setup? I don't want to do too much modification to the doors, but would like the extra quality of the 6.5 over the 5.25's.

**Philip Lee** · 07-02-2010 05:21 PM

That sux George. U probably need some protectors on the front like the rear.

U just need spacer to fit speakers. Unless u have crazy big magnets. Just cut up some mdf and bolt it on. Get some stick on foam to seal the gaps while u are at it.

Btw just transfer my iPod cable from glove box to the center console. Much easier than I thought.

**white_ep3_civic** · 07-02-2010 05:22 PM

Originally Posted by mizone

Anyone have any pics of their setup? I don't want to do too much modification to the doors, but would like the extra quality of the 6.5 over the 5.25's.

The only difference will be the bass you can get. The 5.25 will not be as deep but will be the only difference. The front doors will need modifications as aftermerket speakers have a much bigger magnet than the stock ones are very small.

George that sucks sorry to hear that.

**Philip Lee** · 07-02-2010 05:25 PM

I didn't need to mod the front door to fit my alpine 6" splits, just need spacers as I said.

**Perry** · 07-02-2010 06:00 PM

Originally Posted by Antv

Hey guys i just bought an EP3 and very happy with it

will 6"x9" fit in the rear speaker stock area?

Congrads from IMG i assume.

ANyone here have experience with engine mount inserts?

**Perry** · 07-02-2010 06:01 PM

Sorry to hear what happen George =(

**Twest** · 07-02-2010 06:06 PM

Originally Posted by Nepolian

As most of you know, I've had my car for a while and its hard parked as.....right!?

Well.....thought I'll give it a little drive this morning to the shops to get some milk!

Parked it far from any other car, walked 30m into a shop. 5 mins later come back and someone had nudged the front bar! Theres a gash in my lip and paint scraped off the bar.......

Seriously, there is no word that I can use to describe my rage!!

OHH FFS, probably some jealous prick...Or a retard. I can give you the number for the place that repaired my bumper if you like, they do a good job on bumper repairs.