Yellow sticker after 2 n half years (having to do Emission test) help!

**zillacles** · 22-03-2010 05:17 PM

For the 5-gas test I'm pretty sure these guys in Balcatta can do it:

http://www.efiautos.com.au/

**FastFwd** · 22-03-2010 05:23 PM

Originally Posted by zillacles

For the 5-gas test I'm pretty sure these guys in Balcatta can do it:

http://www.efiautos.com.au/

Correct, they do it and its $55. booking in tomorrow morning Cheers.

**Limbo** · 23-03-2010 08:50 AM

FF - yeah i've already got a new rocker cover setup for the extra 2 ports.
I got a catch can going also, but all these things i'm waiting until i can fix my BMC

Car's going back in for an adjustment to my oil cooler position & intercooler position.

Then this weekend hopefully will fix my BMC

**FastFwd** · 23-03-2010 11:17 AM

Originally Posted by Limbo

FF - yeah i've already got a new rocker cover setup for the extra 2 ports.
I got a catch can going also, but all these things i'm waiting until i can fix my BMC

Car's going back in for an adjustment to my oil cooler position & intercooler position.

Then this weekend hopefully will fix my BMC

Bro...

I love it how your trying to squeeze every little drop of power out of your car. Is the dual port cover already on the car? if its not can you let me know how it goes cos i wouldnt mind doing it also.

**Limbo** · 23-03-2010 12:12 PM

nah not on car yet. Its more to ensure that i don't over pressurise the car.
I like to have things working as best as i can.
Been told that a better vented engine will produce abit more power and give better life to the engine.

I got a spare cover, i drilled the front bits and then tapped them with a kit. Then sprayed it blood red with wrinkle paint. just gotta finish the writing & tap the oil cooler for more inlets

**FastFwd** · 24-03-2010 02:47 AM

Soo good news, should have my yellow of in a week or so.

Got my exhaust raized, got emissions test done today (or yesterday, its late) and looks like ive passed. O2 was borderlining but the rest apparently was really good.

Tomorrow im getting these inlets made into my pre-intake pipe with proper hose tapping from hosemart, not just random welded on piping - Want it to be nicely setup.

Then just going to connected up some 13mm sard lines and my car will be ready for engineer certification.

**FastFwd** · 24-03-2010 04:33 PM

Ok so this morning i got my Breather setup blumbed back into my pre-intake for legal reasons. Cost me $93 all up but $75 for 2 metres of Saard Silicone 13mm hosing and the rest for the copper fittings and custom fabrication. So it wouldnt usually cost that much but i wanted nice hose. You can get $5 a metre hosing if you want.

But it came up sweet, heres the pics:

**Lukezen27** · 24-03-2010 04:54 PM

Originally Posted by FastFwd

Ok so this morning i got my Breather setup blumbed back into my pre-intake for legal reasons. Cost me $93 all up but $75 for 2 metres of Saard Silicone 13mm hosing and the rest for the copper fittings and custom fabrication. So it wouldnt usually cost that much but i wanted nice hose. You can get $5 a metre hosing if you want.

But it came up sweet, heres the pics:

Nice! apart for the illegal pod