| 
		
		
	 
	
	
		
			
	
		
			
				
					19-08-2010 09:19 AM
				
			
			
				
					#8953
				
				
				
			
		
	 
		
		
			
				
				
						
							
							
						
						
				
					
						
							
	Thanks Johno.
		
			
			
				
					  Originally Posted by JohnO   hey Poeter its the steering rack, the rubber piece that right behind the motor theres two sides. to describe it, it looks like the rubber surrounding the gear knob and its black, you'll need new clamps once you've taken it off to grease as you cant connect the clamp again. dont search the thread search the whole sub forum there was a thread with pictures somewhere. 
 I think I may find a mechanic to do it for me or pay someone who's done it before.
 
 Don't trust myself on DIY's.
 
	
		
			
				
					19-08-2010 09:59 AM
				
			
			
				
					#8954
				
				
				
			
		
	 
		
		
			
				
				
						
						
				
					
						
							Was  gonna diy but I'm gonna leave my mech to do it duing my service
						 
				
                                       
                                 
				
		        		SPAM|WERKS got you covered with a johnoroll
 
	
		
			
				
					19-08-2010 10:11 AM
				
			
			
				
					#8955
				
				
				
			
		
	 
		
		
			
				
				
						
						
				
					
						
							Yeah i got my mech to do it.  they're a bit hard to reach.
						 
	
		
			
				
					19-08-2010 11:24 AM
				
			
			
				
					#8956
				
				
				
			
		
	 
		
		
			
				
				
						
						
				
					
						
							I know what I am about to post has been spoken off many times before. However, I like to post my contribution and wonder how other fellow ep3 owners are doing with the fuel consumption? Particularly on highways?
 Fueled up a full tank on Monday and fueled up again last night.
 
 Here's what been measured:
 
 26.28L Mobil 98RON with trip measuring 315km since the last full tank. Did the calculation and it works out to be 8.34L/100km
 
 I drive this to and back from work. Journey primarily consist from Ashfield area to Bella Vista during peak hour times. M4 is about 35% of the journey and Old Windsor Rd for about 50% of the journey. M4 in the morning is reasonably clear but going home at night is slow - 50km average with start-stop traffic. Occasional VTEC are to be seen on the way back home but not so much on the way to work as I'm not as alert in the early morning.
 
 
 I think from factory dc5r AUDM is specified to consume 9.5L/100 or so for combined city/highway driving. So for my EP3 to achieve 8.3 to 8.4 is quite good in my opinion.
 
 So I'm curious to find out if anyone else out there are achieving better results?
 
				
				
				
					
						Last edited by Poeter; 19-08-2010 at 11:31 AM.
					
					
				 
	
		
			
				
					19-08-2010 12:30 PM
				
			
			
				
					#8957
				
				
				
			
		
	 
		
		
			
				
				
						
						
				
					
						
							i think i posted the pic up of the steering rack of wat to pull and greese up, i was gonna write up a diy but since then i formated my laptop so ill try and find a pic of wat to do
						 
	
		
			
				
					19-08-2010 01:23 PM
				
			
			
				
					#8958
				
				
				
			
		
	 
		
		
			
				
				
						
						
				
					
						
							That will be great Thanks  
 Rep points for you
 
	
		
			
				
					19-08-2010 11:15 PM
				
			
			
				
					#8959
				
				
				
			
		
	 
		
		
			
				
				
						
						
				
					
						
							
	wow, so many conflicting perspectives. So do you recommend me against the hardrace mounts?
		
			
			
				
					  Originally Posted by DR HONDA   I have felt all after market mounts that are possible for EP3/DC5R and you will be kidding yourself if hardrace are going to reduce vibration. The EP3/DC5R engine mount design is a bit of a let down by honda. As soon as you try any sort of stiffening up you are going to feel it asap. The closest factory feel with a little more security is the mugen mounts, so dont be fooled   
	
		
			
				
					20-08-2010 12:56 AM
				
			
			
				
					#8960
				
				
				
			
		
	 
		
		
			
				
				
						
						
				
					
						
							
	its all about what u want out of ur car at the end of the day. If u want something nice and comfortable i recommend the mugen mounts. Im running them and they are just slightly stiffer then oem but if u drive ur car hard no doubt they will fail. If u want something more hardcore and you drive ur car hard go for the stiffer mounts. This will improve shifting, decrease wheel hopping and also help save u from header damage. Down fall is that u will get alot of vibration inside ur car.
		
			
			
				
					  Originally Posted by Twest   wow, so many conflicting perspectives. So do you recommend me against the hardrace mounts? 
 so 1 is for comfortable daily driving + spirited driving,
 other is for tracking, street cred, hectic, rip seconds shifting, rev engine and drop clutch...................... so on and so on................. o wait for it ! ............. HOONING ! !
 
				
				
				
					
						Last edited by SuperSteve; 20-08-2010 at 12:59 AM.
					
					
				 
	
		
			
				
					20-08-2010 06:48 AM
				
			
			
				
					#8961
				
				
				
			
		
	 
		
		
			
				
				
						
						
				
					
						
							
	Took the words right out of my mouth
		
			
			
				
					  Originally Posted by SuperSteve   its all about what u want out of ur car at the end of the day. If u want something nice and comfortable i recommend the mugen mounts. Im running them and they are just slightly stiffer then oem but if u drive ur car hard no doubt they will fail. If u want something more hardcore and you drive ur car hard go for the stiffer mounts. This will improve shifting, decrease wheel hopping and also help save u from header damage. Down fall is that u will get alot of vibration inside ur car.
 so 1 is for comfortable daily driving + spirited driving,
 other is for tracking, street cred, hectic, rip seconds shifting, rev engine and drop clutch...................... so on and so on................. o wait for it ! ............. HOONING ! !
   
	
		
			
				
					20-08-2010 07:30 AM
				
			
			
				
					#8962
				
				
				
			
		
	 
		
		
			
				
				
						
						
				
					
						
							Got innovative mounts here - used to stiff mounts on the eg and vibration is only noticeable upon idle. No issue to me and it's a weekend car with track in mind
 
 Plus the $320 AU price landed from the US is another incentive :-)
 
	
		
			
				
					20-08-2010 07:57 AM
				
			
			
				
					#8963
				
				
				
			
		
	 
		
		
			
				
				
						
						
				
					
						
							Hmmm all very good points guys. I've got some thinking to do   
	
		
			
				
					20-08-2010 03:42 PM
				
			
			
				
					#8964
				
				
				
			
		
	 
		
		
			
				
				
						
						
							
						
				
					
						
							
	Was that all mounts needed for that price Benny?
		
			
			
				
					  Originally Posted by bennjamin   Got innovative mounts here - used to stiff mounts on the eg and vibration is only noticeable upon idle. No issue to me and it's a weekend car with track in mind
 
 Plus the $320 AU price landed from the US is another incentive :-)
 
				
                                       
                                 
				
		        		161.4KW ATW Tuned By TODAEG5 JDM B16A SiR-II TURBO
 
 13.28@106.6mph 2.117 60ft On RE001
 
 
 
	
	
 
	
	
	
	
	
	
	Tags for this Thread
		
		
		
		
			
				 Posting Permissions
				
	
		You may not post new threadsYou may not post repliesYou may not post attachmentsYou may not edit your posts  Forum Rules | 
Bookmarks