Page 747 of 1384 FirstFirst ... 2476476977377447457467477487497507577978471247 ... LastLast
Results 8,953 to 8,964 of 16607

Thread: EP3 Type R

  1. #8953
    Member Array
    Join Date
    Jan 2005
    Location
    Sydney
    Car:
    ABA-EP3, LA-EP3
    Quote Originally Posted by JohnO View Post
    hey Poeter its the steering rack, the rubber piece that right behind the motor theres two sides. to describe it, it looks like the rubber surrounding the gear knob and its black, you'll need new clamps once you've taken it off to grease as you cant connect the clamp again. dont search the thread search the whole sub forum there was a thread with pictures somewhere.
    Thanks Johno.

    I think I may find a mechanic to do it for me or pay someone who's done it before.

    Don't trust myself on DIY's.

  2. #8954
    Member Array
    Join Date
    Nov 2008
    Location
    Sydney
    Car:
    Vonda R
    Was gonna diy but I'm gonna leave my mech to do it duing my service
    SPAM|WERKS
    got you covered with a johnoroll

  3. #8955
    Member Array
    Join Date
    Aug 2004
    Location
    Brisbane
    Car:
    Ohthatsit
    Yeah i got my mech to do it. they're a bit hard to reach.
    GD3 -> EP3 -> RB3

    FS Rays nuts etc

  4. #8956
    Member Array
    Join Date
    Jan 2005
    Location
    Sydney
    Car:
    ABA-EP3, LA-EP3
    I know what I am about to post has been spoken off many times before. However, I like to post my contribution and wonder how other fellow ep3 owners are doing with the fuel consumption? Particularly on highways?

    Fueled up a full tank on Monday and fueled up again last night.

    Here's what been measured:

    26.28L Mobil 98RON with trip measuring 315km since the last full tank. Did the calculation and it works out to be 8.34L/100km

    I drive this to and back from work. Journey primarily consist from Ashfield area to Bella Vista during peak hour times. M4 is about 35% of the journey and Old Windsor Rd for about 50% of the journey. M4 in the morning is reasonably clear but going home at night is slow - 50km average with start-stop traffic. Occasional VTEC are to be seen on the way back home but not so much on the way to work as I'm not as alert in the early morning.


    I think from factory dc5r AUDM is specified to consume 9.5L/100 or so for combined city/highway driving. So for my EP3 to achieve 8.3 to 8.4 is quite good in my opinion.

    So I'm curious to find out if anyone else out there are achieving better results?
    Last edited by Poeter; 19-08-2010 at 11:31 AM.

  5. #8957
    Member Array
    Join Date
    Aug 2004
    Location
    BNE
    Car:
    EP3
    i think i posted the pic up of the steering rack of wat to pull and greese up, i was gonna write up a diy but since then i formated my laptop so ill try and find a pic of wat to do

  6. #8958
    Member Array
    Join Date
    Jan 2005
    Location
    Sydney
    Car:
    ABA-EP3, LA-EP3
    That will be great Thanks

    Rep points for you

  7. #8959
    Member Array
    Join Date
    Aug 2009
    Location
    Liverpool
    Car:
    EP3R
    Quote Originally Posted by DR HONDA View Post
    I have felt all after market mounts that are possible for EP3/DC5R and you will be kidding yourself if hardrace are going to reduce vibration. The EP3/DC5R engine mount design is a bit of a let down by honda. As soon as you try any sort of stiffening up you are going to feel it asap. The closest factory feel with a little more security is the mugen mounts, so dont be fooled
    wow, so many conflicting perspectives. So do you recommend me against the hardrace mounts?

  8. #8960
    Member Array
    Join Date
    Sep 2007
    Location
    Sydney
    Car:
    EP3R
    Quote Originally Posted by Twest View Post
    wow, so many conflicting perspectives. So do you recommend me against the hardrace mounts?
    its all about what u want out of ur car at the end of the day. If u want something nice and comfortable i recommend the mugen mounts. Im running them and they are just slightly stiffer then oem but if u drive ur car hard no doubt they will fail. If u want something more hardcore and you drive ur car hard go for the stiffer mounts. This will improve shifting, decrease wheel hopping and also help save u from header damage. Down fall is that u will get alot of vibration inside ur car.

    so 1 is for comfortable daily driving + spirited driving,
    other is for tracking, street cred, hectic, rip seconds shifting, rev engine and drop clutch...................... so on and so on................. o wait for it ! ............. HOONING ! !
    Last edited by SuperSteve; 20-08-2010 at 12:59 AM.

  9. #8961
    Quote Originally Posted by SuperSteve View Post
    its all about what u want out of ur car at the end of the day. If u want something nice and comfortable i recommend the mugen mounts. Im running them and they are just slightly stiffer then oem but if u drive ur car hard no doubt they will fail. If u want something more hardcore and you drive ur car hard go for the stiffer mounts. This will improve shifting, decrease wheel hopping and also help save u from header damage. Down fall is that u will get alot of vibration inside ur car.

    so 1 is for comfortable daily driving + spirited driving,
    other is for tracking, street cred, hectic, rip seconds shifting, rev engine and drop clutch...................... so on and so on................. o wait for it ! ............. HOONING ! !
    Took the words right out of my mouth

  10. #8962
    Got innovative mounts here - used to stiff mounts on the eg and vibration is only noticeable upon idle. No issue to me and it's a weekend car with track in mind


    Plus the $320 AU price landed from the US is another incentive :-)

  11. #8963
    Member Array
    Join Date
    Aug 2009
    Location
    Liverpool
    Car:
    EP3R
    Hmmm all very good points guys. I've got some thinking to do

  12. #8964
    Member Array
    Join Date
    Nov 2004
    Location
    Manly Yo
    Car:
    ED/EG5/EP3/JAZZ
    Quote Originally Posted by bennjamin View Post
    Got innovative mounts here - used to stiff mounts on the eg and vibration is only noticeable upon idle. No issue to me and it's a weekend car with track in mind


    Plus the $320 AU price landed from the US is another incentive :-)
    Was that all mounts needed for that price Benny?
    161.4KW ATW Tuned By TODA
    EG5 JDM B16A SiR-II TURBO

    13.28@106.6mph 2.117 60ft On RE001

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.