Dedicated DA9 Q & A thread

[mooshie]

thought I would post up some pics of my $700 beauty-

[iggie]

I just bought another DA9 today....

should I feel guilty? such a DA whore now!

not sure yet exactly what I am going to do with this one, it has a head gasket leak or cracked head or something, 1 dodgy CV, crunching gearbox and rear wheel bearings are gone, apart from that though it is all good!

couldnt go past a $700 bargain though, it even has rego for another 10 days!

tossing up whether I should replace the engine and box and fix it up a bit then sell or totally dismantle as a parts car. I am definitely taking off the hatch struts, taillights and interior to put on the other 2 cars but we will see what happens with the rest.

Moosh, if you decide to make it a parts car, let me know as i might be interested in some stuff

Igg

[espionage85]

ahhhh, its time to rebuild my gearbox,
anyone know where i can get syncros from?
and a good place in sydney that does gearboxes?

[mooshie]

no worries, PM me what you want and if I decide one way or another I'll get back to you.

[ben11]

Oh and hi to another Adelaide DA9er!- Ben11

yep i finally decided these honda people are trustworthy enough to know what city i live in..

and espionage a couple of pages ago you said you usd a heat gun to take apart some lights, just wondering what temp it was at? thanks man

[espionage85]

espionage a couple of pages ago you said you usd a heat gun to take apart some lights, just wondering what temp it was at? thanks man

cant remember what temp it was at, just try from a lower heat to higher, i dont think it should matter to much as long as your only melting the glue and not the lense

[ben11]

ok cheers will give it a go asap

[Spoon DA9R]

I am sure I had a writeup somewhere....maybe its a some 100 page back when i did my projector fitment i wrote something about it. I used a hair dry and have to be patient when u take lenses out.
using hair dryer or heat gun will make sure you won't melt anything else unnecessary. but that means you can only lift up a section of the lense at a time.

[slimx]

thought I would post up some pics of my $700 beauty-

u didnt get that from sydney did ya?

[pat88c]

I need some help atm
I need a VIN number for DA9 Integra LS

I did a Brake swap on ED9 Aus spec crx 242mm front brakes to 262mm front brakes DA9 Integra LS

i bought a set of ARP Long wheel studs and need to press out and brake the wheel bearing to fit the new long wheel studs on my hub

If anyone would be nicer enough can you PM me your VIN number for your DA9 Integra LS

Thanks pat

[ROM30S]

i know i dont have enough rep to post for sale but im wrecking a complete running da3 sx16 if anyone is interested please pm me im trying to sell some parts.

[mooshie]

I need some help atm
I need a VIN number for DA9 Integra LS

I did a Brake swap on ED9 Aus spec crx 242mm front brakes to 262mm front brakes DA9 Integra LS

i bought a set of ARP Long wheel studs and need to press out and brake the wheel bearing to fit the new long wheel studs on my hub

If anyone would be nicer enough can you PM me your VIN number for your DA9 Integra LS

Thanks pat

I am not sure exactly what you are after, but if you need a front wheel bearing just go to CBC Bearings and ask them. The part number is HO125A suits DA9 Integra, and should be about $65 each.
I have a spare but if I read correctly you need 2, plus i would be unwilling at this stage to part with it in case I decide to fix up the red car.

BTW- I believe Honda ask about $160 a pop.