Majority of the time, they usually charge roughly 80 per corner for the rears, so 160 for the rears and im not too sure about the fronts, maybe 60? I dont think theres much work need to be done at the front compared to the back. They have to trim the plastic bit off then roll it for the rears.
guard rolling you're looking at $60-80 a corner at most spots and that includes the rear bumper tab relocation which is actually the most important mod you'll do to your guards.
pulling your guards is only necessary if you're fitting super-aggressive stance.
It's not a particaulry hard job if you have access to a roller...or if you want to DIY it, just grab a heat gun and a mallet...hahaha
Thats alright. Yeah I actually got a panel beater to do mine when I went through insurance and he hooked me up. But he used a pole -_-". Came out okay but chipped abit. Anyway, don't DIY with heatgun/hair dryer + rubber mallet. It wont come out as good unless you have a guard roller then yeah. You get what u pay for. So I say pay and as Ricemeister said, they move the bumper tab otherwise once you lower it, for euros... it'll rub. It'll clear your guards and not bumper tabs
Originally Posted by richard_k
Bookmarks