Page 829 of 1384 FirstFirst ... 3297297798198268278288298308318328398799291329 ... LastLast
Results 9,937 to 9,948 of 16607

Thread: EP3 Type R

  1. #9937
    Member Array
    Join Date
    Jan 2004
    Location
    VICTORIA melbourne
    anyone can give me a small review on the j's racing intake for ep3? How do they sound? power gains?
    Please +1 REP me if i post something remotely helpful.

  2. #9938
    Quote Originally Posted by av90 View Post
    lol did i just get neg repped cause i said hasport > innovative ?
    yeah that was me. You stated a brand was a better design than the other and thus a reason not to get them - with no proof and only basis is "what you read". This , is the evil of the internet. You read what someone says - their opinion - which in turn subconsciously becomes YOUR opinion.





    PS I have innovative mounts and they are fantastic. Also had hasport on a previous car - good product too. One is shiny one is not. Once is CNC machined alloy the other is steel. No different in performance

  3. #9939
    Member Array
    Join Date
    Nov 2008
    Location
    Sydney
    Car:
    Vonda R
    Mounts serve the same purpose it's only boing factors. Using 300v can feel a big difference compared to the Honda oem oil
    SPAM|WERKS
    got you covered with a johnoroll

  4. #9940
    Member Array
    Join Date
    May 2010
    Location
    Sydney
    Car:
    DC5S
    Quote Originally Posted by TanitY View Post
    anyone can give me a small review on the j's racing intake for ep3? How do they sound? power gains?
    From what I've gathered from other forums, j's racing intake gives gains in the low to mid range.
    In the engine bay, it's a huge carbon whale p*nis that spreads from the top to the bottom. It sucks in air from the front(correct me if I'm wrong).
    in terms of sound...not sure...check YouTube or other forums for ppl who've ha the intake before.
    Pretty sure poeter posted a link on how to install one diy. Check a few pages earlier. It'll be within the last 100pages, just to narrow it down for you. =P
    +rep me if you like my posts! =)
    EP3 --> 4G63 --> DC5s

  5. #9941
    Member Array
    Join Date
    Nov 2008
    Location
    Sydney
    Car:
    Vonda R
    Gruppe m gives ya grunt.
    SPAM|WERKS
    got you covered with a johnoroll

  6. #9942
    Member Array
    Join Date
    May 2010
    Location
    Sydney
    Car:
    DC5S
    Quote Originally Posted by JohnO View Post
    Gruppe m gives ya grunt.
    Gruppe M for the grunt.
    J's racing intake for the carbon bling bling in your engine bay. xD
    +rep me if you like my posts! =)
    EP3 --> 4G63 --> DC5s

  7. #9943
    Member Array
    Join Date
    Jan 2005
    Location
    Sydney
    Car:
    ABA-EP3, LA-EP3
    Quote Originally Posted by hong91 View Post
    any1 using royal purple?
    I'm planning to use it for my next service. Gonna use 10w40 since summer heat is imminent.

    Hopefully this burns less.

  8. #9944
    Member Array
    Join Date
    Feb 2010
    Location
    Sydney
    Car:
    EP3
    Quote Originally Posted by Poeter View Post
    I'm planning to use it for my next service. Gonna use 10w40 since summer heat is imminent.

    Hopefully this burns less.
    If your using 10-40 wouldn't it be worse since that oil will be thicker and it will make the engine work harder?

  9. #9945
    Newcomer Array
    Join Date
    Aug 2009
    Location
    Syd
    Car:
    02 JDM EP3
    Quote Originally Posted by stienerv2 View Post
    If your using 10-40 wouldn't it be worse since that oil will be thicker and it will make the engine work harder?
    in summer some ppl recommend it slightly thicker because the engine will get extremely hot so the thicker oil the better cause it'll eventually thin out.
    imo i still stick with the thin oil unless your driving long distances, I also tend to not use Vtec at all on hot days best saved for the cool nights

  10. #9946
    Newcomer Array
    Join Date
    Oct 2010
    Location
    Inception
    i just changed my oil last weekend to royal purple 10w40, havent checked if its burned any oil yet. used elf 10w50 before and it burned quiet a bit (might have ledfoot alot but did not vtec much).
    Last edited by av90; 11-11-2010 at 11:54 AM.

  11. #9947
    Newcomer Array
    Join Date
    Oct 2010
    Location
    Inception
    Quote Originally Posted by bennjamin View Post
    yeah that was me. You stated a brand was a better design than the other and thus a reason not to get them - with no proof and only basis is "what you read". This , is the evil of the internet. You read what someone says - their opinion - which in turn subconsciously becomes YOUR opinion.





    PS I have innovative mounts and they are fantastic. Also had hasport on a previous car - good product too. One is shiny one is not. Once is CNC machined alloy the other is steel. No different in performance
    an idea was planted in my head by other people from what ive read. it spreaded like a virus, almost impossible to kill. i need to go deeper to find a truth....

    PS thats how my opinion forms, reading stuff on the internet. dont sue me for that.
    Last edited by av90; 11-11-2010 at 11:54 AM.

  12. #9948
    Member Array
    Join Date
    Aug 2004
    Location
    Brisbane
    Car:
    Ohthatsit
    ^ it's fine if you have an opinion, would appreciate if the reason is also stated. makes us forming our opinion much easier. hehe
    GD3 -> EP3 -> RB3

    FS Rays nuts etc

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.