cu2 mods

[1six8]

hmm....speedo cluster with a touch of red...from the type-s models...not sure from where...

bout half way down the page.

http://tsx.acurazine.com/forums/showthread.php?t=797653

[1six8]

anyone got the current honda nav maps software?

[yungquan]

alright guys,
My cars the lux model. so it has auto leveler.

After i lowered the car. my headlights seem to be pointing down. .
The auto levelers are working because i tested it just now. and it did mov up n down.

Is this the knob i turn to make it higher?

the yellow orangy thingo. its very tiny!

Yo TurBice....i have fiddled around with my headlight this afternoon and...here's how it goes..
in that picture, that is the adjustment knob. Use a 5mm socket and twist it:

Clockwise brings the beam down
Anti-Clockwise brings the beam up <---this is that you will need to do to bring the beam to shine back up

Playaround with the adjustment until you think it is reasonably shining far enough. Make sure you are parked on level ground and adjust both sides so they form an even horizontal line

[furythree]

hey guys i saw in the internet that u can look under ur hood or something and find a paint code, with which u can take to autobarn and they can make a spray can with the exact same paint colour for resprays?

ive got like door scrapes on four doors on my car, and its getting pretty unbearable for me. the touch up paint brush is too coarse so the touch up area is darker and extremely noticeable.

any1 know if this is true? and will the paint be metallic etc? do i need this thing called primer or something?

[Lemonhead]

hey guys i saw in the internet that u can look under ur hood or something and find a paint code, with which u can take to autobarn and they can make a spray can with the exact same paint colour for resprays?

ive got like door scrapes on four doors on my car, and its getting pretty unbearable for me. the touch up paint brush is too coarse so the touch up area is darker and extremely noticeable.

any1 know if this is true? and will the paint be metallic etc? do i need this thing called primer or something?

fury - i have definitely used the matched spray paint from Autobarn before for my White Pearl Euro (with the pearl and metallic effect). Result was acceptable. I think you will need a primer only if you can see bare metal. good luck with the repairs.

[TurBIce]

Yo TurBice....i have fiddled around with my headlight this afternoon and...here's how it goes..
in that picture, that is the adjustment knob. Use a 5mm socket and twist it:

Clockwise brings the beam down
Anti-Clockwise brings the beam up <---this is that you will need to do to bring the beam to shine back up

Playaround with the adjustment until you think it is reasonably shining far enough. Make sure you are parked on level ground and adjust both sides so they form an even horizontal line

you are a legend! awesome! so this is the knob we turn!! wonder why the other persons been saying its not the one.
ill do it tonight !! awesome awesome!!!!!!

[Kwangstuhhh]

Hai Gaiz

lol sorry i've been too busy lately...especially helping out with the floods around BNE/work. Anyways good to hear you got ur springs + the rear lip off Paul Fury! wooo
Looking forward to seeing them put to the test .

btw if you want the colour codes:
BU - [NH743M] Buran silver metallic
CB - [NH731P] Crystal black pearl
PO - [NH737M] Polished metal metallic
CW - [NH624P] Premium white pearl

Hope that helps .

I haven't personally got Autobarn to spray stuff for me but I know they sell colour-matching paint in the spray cans (for smaller quantity). I'm probably not gonna go with Autobarn coz I have a mate in the signage industry and has connections to get Genuine Honda paint :P. I think I'm gonna be getting the Modulo rear bumper soon, once I figure out what car I want to replace my daily driver with...Also building a new pc to replace my current one...just too tied up with things lately!...Need to conserve money ( Otherwise I'd be finished with doing all the things to my Euro by now! I've still yet to tint the car. Haven't driven my Euro much lately, still haven't reached the 10k mark! lol

[furythree]

Hai Gaiz

lol sorry i've been too busy lately...especially helping out with the floods around BNE/work. Anyways good to hear you got ur springs + the rear lip off Paul Fury! wooo
Looking forward to seeing them put to the test .

btw if you want the colour codes:
BU - [NH743M] Buran silver metallic
CB - [NH731P] Crystal black pearl
PO - [NH737M] Polished metal metallic
CW - [NH624P] Premium white pearl

Hope that helps .

Delivery eta wednesday
Hopefully everythings alright in brissie
Thanks for the paint codes

[TurBIce]

Nice one can't wait to c how it looks

[furythree]

lol i had a thought about how it would look. chances are u wont even notice any changes. i showed my gf a mugen cu2 and compared it to my stock. and she was like "i dont see any difference, do u really need to spend money :\"

[TurBIce]

I still have not had a chance to try adjust my headlights yet,
Hope i have time tonight.

HAHA, yea. girls are like that. i was like. look. my cars lower! looks nicer now.

She says" looks the same, how much did you pay for making it lower?"

[furythree]

She says" looks the same, how much did you pay for making it lower?"

LOL!!! i just know she is going to say the exact same thing!

do let us know how much u had to rotate the knob to get the adjustment right

how much did u lower the car by again?