EP3 Type R

**stienerv2** · 19-03-2011 09:33 PM

Or get Flexblades cause they bend to the curve of your glass. Very expensive though

**flubbar** · 19-03-2011 09:58 PM

Originally Posted by k0e1

thanks for that i'll call them up and see what they say.. anyone know where i can get stock suspension for the ep or know of anyone parting? these teins are driving me crazy.

why not try the mugen suspension? i've got them on and it's not too bad. quite smooth on the minor bumps. bumpier on the big ones.

**flubbar** · 19-03-2011 10:01 PM

Originally Posted by stienerv2

Or get Flexblades cause they bend to the curve of your glass. Very expensive though

pppffttt....no need for wipers! drive faster and watch the water fly off your windscreen! =P

**SuperSteve** · 19-03-2011 11:25 PM

Originally Posted by flubbar

pppffttt....no need for wipers! drive faster and watch the water fly off your windscreen! =P

Hoon !

Sent from my Desire HD using Tapatalk

**mku01** · 21-03-2011 07:26 PM

hi guys,

just wondering if 2003-2006 model EU civic front guards will fit 2001 EP3??? or are ep3 wider?

**Philip Lee** · 22-03-2011 09:53 AM

mku, i think they would but not 100% sure.

front bumper between EU and EP are interchangable so the guards towards the front of the car should be the same design.

**mku01** · 22-03-2011 11:39 AM

ok i'll order them and will find out soon

thanks philip!

**Jibz** · 25-03-2011 08:30 PM

Anyone replaced the strut tops with camber tops? I think there's a bit of play in my Mugen SS top mounts and I'm wondering if theres a aftermarket solution available, rather than just replacing with the stock item!

**Nepolian** · 26-03-2011 11:53 AM

Originally Posted by Jibz

Anyone replaced the strut tops with camber tops? I think there's a bit of play in my Mugen SS top mounts and I'm wondering if theres a aftermarket solution available, rather than just replacing with the stock item!

Not aware of any tops that can be fitted without mods. There are generic camber tops which will need some work to have fitted. But remember that OEM and mugen struts are quite large and may not have the movement unlike the others!

**Jibz** · 27-03-2011 07:37 PM

Originally Posted by Nepolian

Not aware of any tops that can be fitted without mods. There are generic camber tops which will need some work to have fitted. But remember that OEM and mugen struts are quite large and may not have the movement unlike the others!

That's a fair point.

Is anyone able to confirm whether the Mugen shocks are just a revalved OEM shock? If thats the case, I'll likely be looking at replacing the strut top then with a new oem one.

**bennjamin** · 27-03-2011 07:47 PM

Originally Posted by Jibz

That's a fair point.

Is anyone able to confirm whether the Mugen shocks are just a revalved OEM shock? If thats the case, I'll likely be looking at replacing the strut top then with a new oem one.

essentially yes they are. The upper strut mounts are compatible with each other